Patrick_D Posted April 14, 2012 Share Posted April 14, 2012 There's actually two ahead of the turbo: P/N: 22641AA32A (Front O2 Sensor) - Manifold P/N: 22629AA012 (Center O2 Sensor) - UpPipe And 1 after the turbo (with different P/Ns for MT or AT) P/N: 22690AA69A (Rear O2 Sensor) - Rear Cat (Manual Trans) P/N: 22690AA70A (Rear O2 Sensor) - Rear Cat (Auto Trans) What would be the part numbers for the JDM model? Link to comment Share on other sites More sharing options...
ScoobieTT Posted April 17, 2012 Share Posted April 17, 2012 (edited) Here are the Part Numbers For the JDM: P/N: 22461AA390 (Center O2 Sensor) - UpPipe P/N: 22690AA690 (Rear O2 Sensor) - Rear Cat (Manual Trans) Dont have info on the manifold one, nor the auto trans rear. Edited April 17, 2012 by ScoobieTT Link to comment Share on other sites More sharing options...
Dbl_D718 Posted April 19, 2012 Share Posted April 19, 2012 Part number or specs for: -Nuts on turbo-downpipe studs -Downpipe-transmission hanger bolt I lost both, so I could use part numbers or just specs to go buy them at the hardware store. Thanks. MODS: PW TMIC, Cobb catted DP, HKS cat-back, AVO filter, Bren e-tune; Konis/Epics, Advan RCII Link to comment Share on other sites More sharing options...
SBT Posted May 3, 2012 Share Posted May 3, 2012 bump AGAIN. Rear Upper Differential Bushings: R160 41322AG00A (Bushing)023512000 (Self-locking retaining nut)R180 41322AG00A (Bushing)023512000 (Self-locking retaining nut)According to OpposedForces, they're the same. Even the rear sub-frame appears to the same: R160 20152AG00A20152AG00B20152AG00C20152AG00DR180 20152AG00A20152AG00C20152AG00D - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
555LGT Posted July 9, 2012 Share Posted July 9, 2012 I have acquired the 05-07 - JDM Legacy (Sedan) rear tail lights, however it didn't come with the fog light socket unit where the bulb plugs into. So was wondering if there's a special part # for this or if you know what i could use in its place? thanks Link to comment Share on other sites More sharing options...
mdd Posted August 2, 2012 Share Posted August 2, 2012 I can't seem to locate the PCV part # in the parts list. Anyone have the number? Link to comment Share on other sites More sharing options...
Underdog Posted September 11, 2012 Share Posted September 11, 2012 I believe JDM Rev.A cars (MY2004) also have exclusively R160, yet they come with the alu diff support. Looking to install the aluminum diff support with my new suretrac R160... this is as close to confirmation as I can find that it will fit. Any other news? For reference: Aluminum Differential Member - 41310AG040 Steel Differential Member - 41310AG02B The Crimson Dynamo Link to comment Share on other sites More sharing options...
Boost_addict Posted April 3, 2013 Share Posted April 3, 2013 I cracked my turbo coolant feed line braze on the side of the turbo (think its a banjo fitting off the top of my head). Anyone know the p/n of a new one? Searched banjo and coolant in this thread with no good results... Link to comment Share on other sites More sharing options...
SBT Posted April 4, 2013 Share Posted April 4, 2013 You looking for #7 or "C" in this drawing? http://static.opposedforces.com/epc_img/366495104001.png - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
Boost_addict Posted April 4, 2013 Share Posted April 4, 2013 (edited) Great diagram! Actually it looks like C is pointing to the compressor cover outlet. I need the coolant line that sticks straight up off the side which looks like B in this picture? Looking at the site that that hosted the picture you posted, I'm concerned that coolant line might be sold as part of the turbo assembly since it doesn't have a p/n? Edited April 4, 2013 by Boost_addict Link to comment Share on other sites More sharing options...
vako86 Posted October 31, 2013 Share Posted October 31, 2013 Could you please help me finding banjo filter replacement for LGT 2003 JDM 2.0 turbo? I found 15194AA110 on first page but is it same for JDM ? can I buy only filter without bolt somewhere? Just not to pay 20$ in just a plastic filter that is 1$ worth. Link to comment Share on other sites More sharing options...
Andyjo Posted November 9, 2013 Share Posted November 9, 2013 What is THIS part number? Link to comment Share on other sites More sharing options...
Underdog Posted November 9, 2013 Share Posted November 9, 2013 What is THIS part number? 99071AC220 The Crimson Dynamo Link to comment Share on other sites More sharing options...
Turkeylord Posted November 9, 2013 Share Posted November 9, 2013 What is THIS part number? Yours must look like mine, lol... http://i.imgur.com/s3ZEjmTl.jpg My dealer had it in stock. Link to comment Share on other sites More sharing options...
Andyjo Posted November 11, 2013 Share Posted November 11, 2013 Huh... funny enough, it sort of does! http://i1148.photobucket.com/albums/o568/Andyjo07/2046_zps00332a6a.jpg Same here, dealer had one. Thanks Underdog for finding the part number for me ;-) Link to comment Share on other sites More sharing options...
Turkeylord Posted November 14, 2013 Share Posted November 14, 2013 This guy? http://i.imgur.com/nbfgl1K.png Link to comment Share on other sites More sharing options...
SBT Posted November 14, 2013 Share Posted November 14, 2013 I don't recall, think sprank had something on the IPT site and FBP had a turbo replacement package that contained everything. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
Underdog Posted November 14, 2013 Share Posted November 14, 2013 (edited) Turbo oil drain outlet - 15197AA070 Gasket - 15196AA000 Bolt - 800706730 (x2) http://img534.imageshack.us/img534/2620/wnw1.jpg Edited November 14, 2013 by Underdog The Crimson Dynamo Link to comment Share on other sites More sharing options...
Turkeylord Posted November 14, 2013 Share Posted November 14, 2013 Thanks Rick! Link to comment Share on other sites More sharing options...
SBT Posted November 14, 2013 Share Posted November 14, 2013 I need to get my Subaru parts catalog working. Not sure what the issue is... - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
jknepp Posted November 30, 2013 Share Posted November 30, 2013 How about this guy: http://i44.tinypic.com/zwanbt.jpg The hose on the right with the split and my attempt at keeping it from getting worse - zip tied Another reference pic: http://i42.tinypic.com/25hoarb.jpg Thanks for all your guys' help! Link to comment Share on other sites More sharing options...
SBT Posted November 30, 2013 Share Posted November 30, 2013 Looks like it's Item 1 or 2 here - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
Underdog Posted November 30, 2013 Share Posted November 30, 2013 My FAST2 catalog shows 99071AC230 for my '06 LGT (build date 06/06), along with several other '05 and '06 VINs I have on record. Not sure why the conflict with Opposed Forces, as 99071AC020 also shows up in the reverse lookup for '05/'06 MY LGTs. They are both active part numbers; 99071AC020 retails for $28.46, while 99071AC230 retails for $11.08. My guess is that the *230 was a number assigned to the same hose but from a different manufacturer. I have seen this before, where early MY part numbers are different but physically identical to later MY part numbers, and the early stuff is always way more expensive. The OEM alternator is an example from my recent memory, with the '05 being ~2x the cost of the '06+ part, yet having the same mechanical and electrical specs. The Crimson Dynamo Link to comment Share on other sites More sharing options...
HarryD Posted February 2, 2014 Share Posted February 2, 2014 (edited) I have tried searching in the various related threads, but cannot find a part number for the front lower control arm Front bushing (2005 LGT). I would like to replace the front bushings with uprated OEM parts, and I believe that the 2008 WRX, WRX-STi and Spec B might use the same part? I will be replacing the Rear bushings with Group N PN ST20204ZR010. For my use, I don't feel I need Group N replacement for the front bushing. Could someone help me find this Front bushing PN? My searching on OpposedForces seemed to indicate PN 20204AG030 and I ordered a pair, but it was hard to determine definite model years. I found the following info which gives the relative numbers: STI Group N front arm rear bushings - ST20204ZR010 STI Group N front arm front bushings - ST20204ZR000 08-10 Impreza/Spec.B front arm rear bushings - 20204AG011 08-10 Impreza/Spec.B front arm front bushings - 20204AG030 Edited February 4, 2014 by HarryD Information found on alternate search. Link to comment Share on other sites More sharing options...
SBT Posted February 3, 2014 Share Posted February 3, 2014 OpposedForces.com - search Impreza, Forester, Tribeca and Legacy platforms - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now