View Single Post
#25: 04-30-2013, 08:53 AM
 
 Max Capacity
Max Capacity's Avatar
Title: Gearhead
Rank: Donating Member
Location: Tolland, CT. USA
Car: 05GT Wagon 5MT stg2, 09 specB stg1
Posts: 14,817
iTrader: (4)
Send a private message to Max Capacity Find all posts by Max Capacity Reply With Quote
Just found this again.

I think by fittings I meant that 24mm long bolt fitting thing that holds the oil cooler to the block, the oil filter screws into it. I bought a set of deep socket from Harbor Fright for the 24mm Deep socket.


I used acetone to clean out the oil side of the cooler just to break up anything that may have been in there. Every time I dumped it out, just oily residue came out, no metal or chunks of anything.
__________________
195k, 5/20/12 new ej257 short block, 8/20/11 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. CHECK your oil, these cars use it.

Engine Build - Click Here