View Single Post
#7: 04-16-2013, 11:37 PM
 
 urfsin
urfsin's Avatar
Title: 2x Rally X Champ
Rank: Donating Member
Location: Santa Barbara
Car: Grocery Getter
Posts: 1,738
iTrader: (4)
Send a private message to urfsin Find all posts by urfsin Reply With Quote
Quote:
Originally Posted by PNWSubie View Post
Need some help on what mods should come next for my 05 LGT. It had the following mods done when I bought the car last month. Wondering what turbo might be best for the set up also?

-Stage 1 Shortblock setup
-Wiseco pistons
-Manley H-Beam Rods
-ARP head studs
-Killer B pickup/tray
-ACL Race Main/Rod Bearings
-OE Gasket Kit
-OE 11mm oil pump

-Machine Shop - Bottom end, clean, bore and hone, deck and blueprint
-Machine Shop - Balance bottom end, pulley to clutch cover
-Machine Shop - Heads, 5 angle valve job, clean, set valve clearance, install new seals
-Machine Shop - Resurface flywheel, clean/chamfer/polish crank
-ACT clutch kit - SB5HDMM
-Inlet Hose 2.4" spigot 08+ WRX 05+LGT black

-High Performance Timing
-Side feed 500cc injectors
-light ecu tune

Thanks for the Help
That's quite a bit of work on the engine there....what turbo does it currently have? Do you know what numbers your car is pushing?

Most people here would be running at least some form of 20G turbo (or similar / bigger) with those sorts of mods and be making at least 350 WHP.

Also, is this car for DD duty? Auto-X? HPDE?
__________________
Slide It Sideways