View Single Post
#10: 04-16-2013, 10:44 PM
 
 kbear
Title: New Member
Posts: 6
iTrader: (0)
Send a private message to kbear Find all posts by kbear Reply With Quote
changed the tranny filter. First, the solenoid b connector clip had fallen out of the retaining bracket and was resting on the pan, and secondly, the pan had been noticably pushed in in the middle, looked like ground clearance issue. So, of course i re-attached the solenoid plug in into the clip holder and hammered out the bottom of the pan and to my amazement all gears are working and shifting normally. It's coming on two weeks since i did the work and all is still functioning properly. Engine light still comes on but i think it's from a #3 cylinder misfire that i will need to focus on next. New plug first. Will clear codes and post my results, thanks. k hebert