Wanted to share a maintenance tip with the forum.
I've taken my RacerX TMIC on and off my car any number of times ...
and noticed clearance is very tight between TMIC and Clutch main control cylinder assembly (see photo).
To protect the TMIC from damage during installation I insert two (2) pieces of cardboard on top of clutch control cylinder. For removal of the TMIC I slip the cardboard in from underneath the car.
Remember to remove the cardboard after you have completed work on the TMIC.
I find this simple precaution helps when wrestling the TMIC into the proper fitment location, especially if you have removed the throttle body connector hose.