View Single Post
#20: 03-10-2013, 01:03 PM
Passenger headlight bulb replacement
 
 dlem898
Title: New Member
Location: Toronto, Ontario
Car: 2010 Legacy 2.5i LTD
Posts: 15
iTrader: (0)
Send a private message to dlem898 Find all posts by dlem898 Reply With Quote
Quote:
Originally Posted by ellie_marie View Post
The passenger side is much easier than the driver's side.

For the driver's side, we removed several of the plastic clips using pliers and screwdrivers, and then had to peel and hold back the finder liner. Then we had limited access to the light compartment. Then, after several tries, we were able to replace the bulb.

On the passenger side, we removed the air filter box to gain access to the light compartment. This took significantly less time than the driver's side.

Good luck. It's not easy.
Spent considerable time and sweat changing the driver side bulb (also snapping part of the wire harness).

I took a look at the passenger side and it looked a bit complicated to remove the filter box. Can you provide any comment, advice or instruction on how best to do this?

Accessing it via the wheel well or removing the bumper still did not appear to provide a clear access. I don't want to break another wire hareness.

Thanks.