View Single Post
#12: 01-17-2013, 06:38 PM
frank_ster's Avatar
Rank: Donating Member
Location: Knuckastan
Car: 05 lgt 5EAT 3.8, buell 1125cr ,79 camaro
Posts: 5,243
iTrader: (1)
Send a private message to frank_ster Find all posts by frank_ster Reply With Quote
the tank i purchased , came with a filler attachment but the european type,
there seems to be 3 types world wide.

1-1/4" acme north america and suthern europe

cup type northern europe

and england has another type. i think its just like a regular propane left hand thread thing.

so i had to order this part seperately. i was not able to find anything untill i found sherwood valves. i found one on a liquidator on ebay for 25$.
so i need this to fill the tank!

the next item i will drill and install a larger bung on the rear bottom of the tank. from there i will install a gerotor pump capable of 140 gph that will circlulate the propane though the rail. the pump i'm going to use is a mallory 140 capable of 10 psi.

thats where i am at this point.
Now that's thinking out of the boxer!
fyi all 05 + legacy's have built in code reader