If my plans workout I will have picked up a VR6 Corrado by the end of the week. In order to help fund some of my project, I would like to sell a few parts from the Legacy. I miss driving a manual too much, and investing more into an auto doesn't make sense. I'm still going to hold onto the Legacy, but it will likely just be my DD.
For now I won't be shipping anything. These are currently pickup only
Last year I bought a Stromung quad tip catback from Biggu, and have driven less than 3k miles on it since. It is still currently on the car. Since I don't want to try to piece together another stock CBE. I would prefer to trade this + $$ on the buyers end. I do NOT want to ship this, plus I need a cat back in return. I'm thinking $600 + your catback
. I plan on paying a friend to help with the swap, who also happens to have a lift. Buyer will also receive a free can of polish! The pictures show it hanging low, all hangers are still there. The PO removed two of the hanger points from the car, and new mounting points haven't been welded onto the car yet.
Original thread: http://legacygt.com/forums/showthrea....html?t=179699
The wheels are flat black XXR 522's 18x8.5 48 offset. They were bought new in early spring 2012 and wrapped with used Bridgestone Potenza RE050A's. The tires are 225/40/18, and a little stretched. They don't have a ton of life left in them, but could get you by. There are no bends in any of the wheels. I did nudge a curb one morning while in a drive thru getting my morning coffee
The curb made a nice slice in the tire sidewall as well. It does still hold air. I will clean them up to verify there are no other blemishes shortly. $500 picked up
Stanza scoop. I bought this new from HKC speed in March 2012. Unfortunately, one of the fasteners broke free from the fiberglass in shipping. Since I am no body expert I used a little adhesive and gently tightened it down when installing. It fits perfectly, and is currently flat black (plasti-dip). SOLD
Prosport Halo Boost, oil pressure, and dual stealth cubby gauge holder. Gauges are brand new in the box, never used. It also has never been used. Oil pressure and cubby pod $130 picked up
. FYI if purchased you may want to buy the "sandwich" adapter plate for an easy way to connect the oil pressure gauge. I have one, but I installed it during my last oil change. They are $37 new. All sold
I have a dozens of small parts laying around that I may list later. Feel free to post or PM me if you have something you are looking for, OEM or aftermarket. I will get more pics later. If your local, I can always just show you anything you're interested in. Prices are OBO. If you have a set of 5x100 wheels no bigger than 16" I may be interested in trades.
***Updated with dirty car cell phone pics***