I'll give you guys a hint. You may want to pick up some Permatex black silicone adhesive to seal the bottom of the grommet. Mine was leaking water into the cargo area.
I used a tooth brush to clean the area after pulling the grommet up, put a good coat of sealant there, put the grommet back in and put a coat around it. Used the GF's blow dryer to cure it.
No leaks after the heavy blowing rain storm we had last Friday.
178,000+ miles, 5/20/12 new ej257 short block, 8/20/11 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. CHECK your oil, these cars use it.
Engine Build - Click Here