I'm currently in the middle of doing the STi manifold swap. I got an 08 Sti manifold, it bolts up perfectly to my LGT sidefeed TGV's. The question I have is about the fuel rail specifically.
In the first pic, you can see how the left hand side rail it very close to the bottom bolt hole on the STi manifold. AKLGT's pic shows this being removed
The second pic shows the mounting bracket for the right side rail clearly interfering with the manifold.
So my question to those of you who have done this, how did you approach this issue? Did you mount the fuel rails towards the center of the manifold or just cut off the brackets and let it float?