View Single Post
#5: 11-25-2012, 10:10 PM
 
 poom
Title: Member
Location: Pittsburgh
Car: 2012 Legacy 3.6R Limited & 300ZX TT
Posts: 94
iTrader: (0)
Send a private message to poom Find all posts by poom Reply With Quote
Ok, installed the Denso ballasts and the d2s bulbs today. It was a pain in the ass. The wires were to short so I had to lengthen them so I could mount the ballasts. I soldered on the harnesses from my ddm kit so I can unplug them if I need to remove headlight in future. Also I removed the covers on the ballast and put a bead of silicone to keep water out. I only drove the car for 20 min but no flickering or shaking. The light out put seems more even and the cutoff seems cleaner. The bulbs have no blue tint at all 4300k.