Thread: Tail Lights...
View Single Post
#29: 11-15-2012, 07:36 PM
 
 EJ25subie05
EJ25subie05's Avatar
Title: Senior Contributor
Location: Harrisonburg, VA
Car: 2007 spec B, 04 PSM STi, 2006 #41 spec b
Posts: 736
iTrader: (34)
Send a private message to EJ25subie05 Find all posts by EJ25subie05 Reply With Quote
don't use the heat gun method for the headlights, imho it sucks using a heat gun, it takes for ever.

take your headlight off, set your oven at 215 degrees (thats what i used and just did two sets yesterday).take off the screws in the back of the headlight, then put the headlights in the oven for 10-12 minutes, take them out and just work your way around them, first one i used a knife to pry open, but if you make them warm enough you will just be able to pull them apart by hand, you pull the tabs up and pull the headlight apart. after that you can clear them or black them out (i blacked mine out).
The Following User Says Thank You to EJ25subie05 For This Useful Post:
Somerandomguy175 (11-15-2012)