I know this probably belongs in interior/audio forum but I figured it would get more views here.
I have my cubby gauges tied into my clock display wire harness and everything powered up fine. My boost gauge wasn't reading anything so I took my multimeter and touched the ground and the input from the sending unit to check for 1.2v(that's what Prosport says it should be) and it was over 8v. Then I checked the power wire and got nothing. (everything was unplugged by the way.. Both gauges and the clock)
I plug everything back in and neither of the gauges come on and my clock/temp display is acting odd. The clock works fine but the temp is flashing.. Pic below.
Any help would be appreciated.