Headunit installation notes
Pretty straightforward once the HU, 14-forward and i88 harnesses are soldered together. Spent most of my time adjusting the JDM HVAC gaps and testing out the HU before final installation. Biggest challenge is the 2-DIN opening on the JDM HVAC - it's about 3mm too small in height and ~6mm too small in width. I made a mess of the cutting so I have go back and fix it.
Be patient. Getting the alignment gaps right is trial & error, but pretty easy withj a dremel.
Last edited by BlackHole; 11-28-2012 at 05:26 PM..