View Single Post
#2633: 10-11-2012, 10:48 AM
fysics's Avatar
Title: Senior Member
Rank: Donating Member
Location: Connecticut
Car: '08 DGM specB stage2, '92 LeMons miata
Posts: 387
iTrader: (4)
Send a private message to fysics Find all posts by fysics
Originally Posted by SCHM1AN View Post
My endlinks were also straight at the time, but I noticed the rears are slightly kinked since everything has settled. I, too, skipped the spacers in the rear.

How long did it take to install the GS MCB? Impressions?
I need to check the rears and will check the fronts again tonight once I put on a few miles.

if you don't count the 2x that I took it out and tried to refit I'd say about an hour and 15min. I find this post to be about the most true

definitely had to flatten the bracket, only installed 2/5 bolts (going to go back with more light to see if I can fit one of the smaller ones), and my fitment of the cup isn't quite square on the master cylinder itself.

will hopefully have some comments on impressions tonight, short drive into the office for me.
Attached Thumbnails
Click image for larger version

Name:	IMAG4406.jpg
Views:	51
Size:	348.9 KB
ID:	131143