View Single Post
#3: 10-03-2012, 06:31 PM
 
 blklgt05
blklgt05's Avatar
Title: Burning Monkey
Rank: Donating Member
Location: SoCal
Car: '10 RRP LGT Stg 2.1 '05 OBP LGT Stg 2.1
Posts: 2,692
iTrader: (7)
Send a private message to blklgt05 Find all posts by blklgt05 Reply With Quote
Quote:
Originally Posted by mosthated View Post
im needing help to find where the thread for the diy to have a clean cut off on my factory projector lens. i found a company here in houston tx who will paint my headlights for 100 dollars with warrenty. so while they have the lens off i can go in and fix the cut off on the lights. so if anyone can point me the right direction would be most greatful.
Buy the strongest aluminium back high temp tape at home depot (its the big roll, around $20). Bend the metal flap up, use the tape and cover the opening, then bend that metal flap back to where it was. I used a flashlight thru the projector to test the cut-off and make sure no lights were leaking before re-installing the headlight.
__________________
The Following User Says Thank You to blklgt05 For This Useful Post:
mosthated (10-04-2012)