Quote:
Originally Posted by Han'sGT
Anyone have the torque spec for the sway bar bushing bracket? I was looking on the "shimmy" TSB and the front bracket is noted as 18.4ft.lbs. When I put the new 19mm rear bar on I torqued the crap out of the rear  |
According to the service manual (2010)-
Always tighten the bushing in the state where
the vehicle is at curb weight and the wheels are
in full contact with the ground.
Tightening torque:
Stabilizer link
33 N·m (3.4 kgf-m, 24.3 ft-lb)
Stabilizer clamp
38 N·m (3.9 kgf-m, 28 ft-lb)