View Single Post
#7: 07-31-2012, 04:10 PM
 
 .:Catalyst:.
.:Catalyst:.'s Avatar
Title: AllWheelsDriven
Rank: Donating Member
Location: Bend, OR
Car: 2006 spec.B #163 stage.2 .:CryoTuned:.
Posts: 3,146
iTrader: (46)
Send a private message to .:Catalyst:. Find all posts by .:Catalyst:. Reply With Quote
I'm totally confused by your logic. You are stage 1 - had a few lines pop off at around 17psi so rather than using clamps or such you bought a $1000 TMIC, a turbo inlet, EBCS, and CBE?

I highly recommend you do some more research or ask questions before buying anything. For what you spent on the PW alone you could have done a DP, tune, and found a used Perrin or AVO TMIC.

Blowing vac lines isn't fixed with another TMIC. Seems from your first post here that you aren't focusing on a new turbo, but your building your car as if it's going stage 3 within the week.