View Single Post
#43: 06-25-2012, 01:09 PM
coldsubycz's Avatar
Title: Senior Member
Location: Minnesota
Car: 05 LGT 5MT AVO380 AVOFMIC ID1000
Posts: 239
iTrader: (2)
Send a private message to coldsubycz Find all posts by coldsubycz Reply With Quote
fahr_side is the man with the pic's! Thanks for that!

the core size on the PW is 16 x 7.75 x 3.5 inches (406mm x 197mm x 89mm)
the core size on the SP is 19.7 x 7.9 x 3.5 inches (500mm x 200mm x 90mm)

Like this IC! It would be cool to see a comparo between these two IC's!

Also, from the picture it looks like the duct doesn't seal the back of the IC by the firewall. Would the air possibly blow "over" the IC an not "thru" the IC. By no means am I knocking the design, just curious if I'm missing something from an engineering standpoint (as I'm not an engineer )