Thread: Intake Manifold
View Single Post
#10: 05-23-2012, 08:28 AM
 
 Max Capacity
Max Capacity's Avatar
Title: Gearhead
Rank: Donating Member
Location: Tolland, CT. USA
Car: 05GT Wagon 5MT stg2, 09 specB stg1
Posts: 13,144
iTrader: (4)
Send a private message to Max Capacity Find all posts by Max Capacity Reply With Quote
You have a 05, there are a few things you'll want to do while the intake manifold is lifted off the engine.

Replace the orange o-rings at Intake to TGV's.
Tighten the 6 hose clamps on the gas lines.
Rotate the one clamp so you can tighten from the top, if ever needed.
Have screw type hose clamps ready, to replace the oem style that need special tool.

See my thread for some pictures.
http://legacygt.com/forums/showthrea...-r-184106.html
__________________
188k, 5/20/12 new ej257 short block, 8/20/11 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. CHECK your oil, these cars use it.

Engine Build - Click Here