Originally Posted by smithsrsn
You can use a small dab of high temp silicone to hold the connector in place. I also use high temp silicone on my vacuum hoses to prevent them from popping off under boost. If you use it on vacuum hoses, be sure not to get silicone in the vacuum ports which could clog them.
Thanks for the tip. I think i will give that a try.
As far as the vacuum hoses and such, I usually use this sealer call automotive goop. Takes a few hours to set but once it does... It's high temp, flexible(expands and contracts with hoses), clear in color, and it it's very very strong. It was recommended to me years ago by a member on clublexus.