Originally Posted by Max Capacity
Only 1/2 a quart of oil ? have you checked it since ?
The fix for the OCV cel is sometimes, to remove the banjo filter.
Indeed - after I added the 1/2ish quart, oil was right at full line.
Originally Posted by bmx045
no oil delivery!
scenario- you spun a bearing and now bearing material is clogging banjo filter(s) delivering to your turbo and avcs solenoid- this causes ocv codes since there is no oil being delivered to the avcs. if oil light came on, its too late. drain oil and inspect for metal flakes/shavings
If I find no shavings/flakes?