View Single Post
#14: 11-18-2011, 06:53 PM
 
 urfsin
urfsin's Avatar
Title: 2x Rally X Champ
Rank: Donating Member
Location: Santa Barbara
Car: Grocery Getter
Posts: 1,736
iTrader: (4)
Send a private message to urfsin Find all posts by urfsin Reply With Quote
Oh yeah, are you running the stock top hat's up front or camber plates? How much negative camber are you running up front?

Since I am using the stock top hats, I had to use aftermarket camber bolts to get -1.5 degrees of camber. That seems to work out OK. Also, for alignment I am running just a hair of toe out up front. In the rear I wanted zero toe, but the lame ass tech said he could not get it to go to zero....so I have a hair of toe in. It bugs me because I know that is making my car push in turns, so I have to compensate with higher tire pressures in the rear and setting my coilovers stiffer in the rear.

I did have an alignment done like 3 years ago where the tech was able to get zero toe in the rear, so I think the place I went to just did not know how to do it or something.

Sorry for the 20 questions....I just don't see many other Outback owners tracking their car so I would like to get your input.
__________________
Slide It Sideways