View Single Post
#10: 11-16-2011, 08:01 PM
 
 minuccims
minuccims's Avatar
Title: Flying W00t Monkey
Location: Rhode Island
Car: 2010 LGT Stage II, 2007 Outback 2.5i
Posts: 5,094
iTrader: (2)
Send a private message to minuccims Find all posts by minuccims Reply With Quote
Itsme -
Appreciate your continued efforts for p this platform. As before, interested in rear SS lines. Have Brembos, and the little oddity with the rear rotors is the 5th gen has the 190mm bigger drum than the 170mm 4th gen/WRX with 5x100 pattern. The only rear rotors available, that I can find are 08+ STI rears. Need to bring them to machine shop to drill 5x100.


Quote:
Originally Posted by CL21376 View Post
I would probably be interested in stainless lines, depending on the cost....and hopefully grimmspeed will eventually come out with the master cylinder support brace.

I pm'd grimmspeed a few weeks back. The 4th gen brace is close but requires some modification. I did not follow thru on the extent of the mod for DYI.