View Single Post
#4: 11-09-2011, 09:25 AM
 
 MarkE
Title: New Member
Location: SoCal
Posts: 10
iTrader: (3)
Send a private message to MarkE Find all posts by MarkE Reply With Quote
Responded to all PMs.

dustincredible,

Thanks man. It's just been sitting in my room and it's not show-room quality so I'm letting it go for a low price. I bought the intercooler from a vendor here so I figure I'd try and sell it here first.

rad.rac3r,
This intercooler is huge! When installing, it will hit the rain gutter by the firewall as you drop it into place. Getting the throttle body hose to stay on the intercooler is a PITA, I had to reclock my turbo like 2mm clockwise to get it to stay on on the throttle body hose and not come off while tightening the turbo flange or boosting.
As you squeeze it into the turbo flange, the intercooler side will rub against the flange, scratching the paint off. I recommend putting a towel on the top of the intercooler and on the hard line just below the throttle body hose so the intercooler doesn't touch anything hard as your wiggling it into place. I also removed those sleeves on the throttle body hose because it just kept sliding off.

-Mark
The Following User Says Thank You to MarkE For This Useful Post:
rad.rac3r (11-09-2011)