View Single Post
#275: 10-06-2011, 11:30 AM
 
 rushak
rushak's Avatar
Title: New Member
Location: Mission Viejo, CA
Car: 2006 Outback XT LTD
Posts: 19
iTrader: (0)
Send a private message to rushak Find all posts by rushak Reply With Quote
Quote:
Originally Posted by oak23 View Post
I installed the license plate LED's on my Outback. I reversed the right bulb holder as recommended but not the outer lens cover, but the bulb holder doesn't go in all the way, causing the outer lens cover to sit a bit below the rear overhang, not flush.

Anyone else with a wagon or Outback experience this as well? Solutions? I've emailed Dan at FastWRX so hopefully he'll respond as well. If I get a chance I'll post pics.

BTW - I also installed the puddle lamps. Both installs highly recommended... Thinking of doing interior too but a little pricey for all 3 lights.
Sorry for bumping an old thread, but I didn't see this answered. I ran into this myself and I just filed down the 2 notches on the back of the gray plastic housing bulb holder and flipped it around. Problem solved. You'll notice there are 2 grooves those notches are keyed to fit into that get in the way when it's flipped the other way.