|
Step 2 – Once you have removed the fuel pressure regulator bracket, you will need to undo the cable support bracket from the strut tower. The MCB will use these mounting holes (using the two supplied longer bolts).
The second photo shows the fuel pressure regulator bracket removed as well as the cable brace. Recommend you disconnect the cable brace from the cable mounting point. This will make it a lot easier when it comes time to install the MCB and you need to be able to move the cable brace around behind the MCB.
__________________
So many mods, so little time
Last edited by SBT; 08-27-2011 at 11:45 PM..
Reason: Clean-up
|