View Single Post
#4: 02-27-2011, 08:51 PM
 
 Drew888
Drew888's Avatar
Title: Burning Monkey
Rank: Moderator
Location: SoCal - Yorba Linda
Car: 2008 Spec-B, too many mods, too many...
Posts: 3,097
iTrader: (17)
Send a private message to Drew888 Find all posts by Drew888 Reply With Quote
Your new Bi-Xenon lights next to the old (new on the right).




The old lights on the way out. You can see I've removed the 4 screws already. In the bottom of the pic above you can see the bracket that will need to be installed to the light prior to installing to the housing.



At this time you will use the supplied hardware and install this bracket. You can also reference the OEM to gauge how it will go.
If you look closely at the pic below you will notice the bracket is installed and how the hardware was used.


Last edited by Drew888; 02-27-2011 at 10:11 PM..