View Single Post
#1: 02-10-2008, 10:13 AM
ABS Wheel speed sensors
 
 Burock
Burock's Avatar
Title: Member
Location: New England
Car: '06 Legacy GT Wagon/ '10 Forester XT
Posts: 126
iTrader: (0)
Send a private message to Burock Find all posts by Burock Reply With Quote
I have the common winter problem of the CEL, Flashing Cruise, and ErSS in the odometer. I've reset the ECU multiple times, cleaned off the offending wheel sensor, read every post on this issue, and keep getting the problem. Turns out, code C0107 has been displaying, indicated RH ABS speed sensor readings are abnormal. I took out the speed sensor and ordered a new one. Question is- anyone know how to test the ohms on this sensor? Should I spray some brake cleaner into the hole where the sensor sits to clean out the hub? Where is the magnetic ring for the ABS that produced the signal for the sensor and how to clean it off?? I'm sure I'm not the only person here with this issue, and it didn't go away on its own (around 1000 miles since it started). thanks, jeff.


I'm currently getting erratic Ohm readings between 30 and 130 ohms w/ the sensor off the car...

Last edited by Burock; 02-10-2008 at 11:55 AM..
Sponsored links