nice as usual Bing!
note - there's another spot to run the power wire...it's smack in the center of the firewall and requires removing the TMIC to get access (or maybe not if you've got smaller hands than I do
). It comes in behind the stock radio and you can run the wire in a slot in the rubber insulating pad down the drivers side of the transmission tunnel. Almost as if it was meant to be done this way.
kudo's to Manville from JL for the info:
Originally Posted by msmith
Here's the 2 AWG power wire going through the firewall right behind the intercooler. There is a factory grommet here, which we used... very convenient.