Jump to content
LegacyGT.com

MOMSWGN

Mega Users
  • Posts

    469
  • Joined

1 Follower

Personal Information

  • Location
    El Paso
  • Car
    05 BSM BP 5MT

MOMSWGN's Achievements

Proficient

Proficient (10/14)

  • First Post
  • Collaborator
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. I took the STI quads off my wagon. They were too loud for me after the work I had done on the car. On a stock car they were perfect.
  2. For self-leveling you need to install a sensor on the driver's side of the car. More work. I have JDM lights with USDM shields; as you can see from the video the pattern is correct and the cutoff is sharp.
  3. Special thanks to Andivic for getting the lights and switch, and for labeling the wires JDM HID and Headlight Leveler Walkthrough 1. Remove OEM headlights. Remove grill and bumper as per this walkthrough: http://www.legacygt.com/forums/showthread.php?t=57598&highlight=bumper+walkthrough. Unbolt head light brackets. Unplug main harness and turn light harness. Remove pop-it and bolt on top of head light housing. Pull the headlight housing out. 2.Install JDM HID housing. The JDM ones do not have the side prong to stick into the receptacle. 3.Connect the main harness. The turn light harness is too big for the JDM housing, so you either have to modify the housing or use the JDM socket part number 84931AG000. You probably need to order the corresponding bulb p/n 84920KE020. To make the parking/city light work you need to get p/n 84981AG190 and 784920080 or rig something up and connect to the main harness. http://opposedforces.com/parts/legacy/en_b13/type_96/electronic/head_lamp/illustration_1/ 4.The roller switch has 4 wires controlling the leveling function and 2 for illumination. The four wires are +12v, driver, passenger, and ground. The illumination wires are +12v and ground. I connected the two grounds together and tapped into the closest ground. The +12v for the illumination I tapped into the illumination on the folding mirror switch (wire going in to pin 14, see the folding mirror walkthrough). For the +12v for the leveler I tapped into a switched +12v I had running to my radar detector. http://i300.photobucket.com/albums/nn16/MOMSWGN/Picture162.jpg http://i300.photobucket.com/albums/nn16/MOMSWGN/Picture163.jpg 5.Connect wires to the driver and passenger wires from the rolling switch and run them into the engine bay. I ran them behind the headunit and out the main wire harness grommet. http://i300.photobucket.com/albums/nn16/MOMSWGN/Picture158.jpg http://i300.photobucket.com/albums/nn16/MOMSWGN/Picture157.jpg 6.The leveling motors have three wires, +12v, ground and signal from the rolling switch. Run the wires from the interior compartment to the corresponding headlight housing and connect to the corresponding wire. http://i300.photobucket.com/albums/nn16/MOMSWGN/Picture155.jpg http://i300.photobucket.com/albums/nn16/MOMSWGN/Picture156.jpg 7.I used local grounding points and connected to the ground wires of the leveling motors. I tapped into the +12v I had going to my Hella horns to connect to the +12 wires of the motors. 8.Tidy up with zip ties and you are done. [ame=http://www.youtube.com/watch?v=A_TkkakMqak]YouTube - Gen 4 Subaru Legacy with JDM HIDs with Leveling[/ame]
  4. The guy that bought those mirrors last year still has them on a shelf in his garage.
  5. I like to be able to fold the mirrors in the car before pulling into a tight space. Folding them after I get out of the car is less important to me.
  6. Once you do the mirrors you can add this: [ame=http://www.youtube.com/watch?v=nuoJvk92rFM]YouTube - liberty[/ame]
  7. I know they pivot, but would rather not have any damage. I'll off set the effects of the mirrors by me losing some weight and setting my seating height lower
  8. It does improve the performance of my wagon when my mirrors aren't ripped off when backing out of a tight spot.
  9. Not much, about $275 with button shipped from Japan. Contact andivic.
  10. No man, we'll raise the bar together. This also is partly your project.
×
×
  • Create New...

Important Information

Terms of Use