Bran808

Gotcha. It wouldn’t be a total surprise if the stock VA stuff fit, being that Subaru has so many platforms that share certain components. Although fitting is one thing and performing well is another. But, if they were interchangeable, it would open up a ton more options. You mentioned coilovers earlier......are any available right now? Curious if anybody has lowered a newer leggy yet?

Wow, that rear spring is way shorter on the WRX/STi than the new Legacy. I wonder if swapping complete spring and strut assemblies from a VA WRX/STi might work? The rears look similar, just shorter assemblies. The fronts are hard to tell from the pics. None of your buddies have their stock stuff they can loan you to try out

Just to jump in on here to give you a quick answer. It shouldn't be a problem for outer fender clearance.....I'm running a 9.5" +38 with 255/35's and there's still a bit of room to go. I'm fairly certain it would be kind of tight on the inside near the strut though, unless you're already running coilovers.

Finally got my Feal 441's installed this past week. Had them done same time as my Whiteline 22mm adjustable rear sway bar and braces. The jury is still out as it's only be less than 100 miles on them, but so far I'm pretty happy with the feel of the Feal's. The ride is pretty firm, without being bouncy, even as almost the lowest setting, but still quite comfortable. I just need to play around with the dampening and dial in the ride height.

Agreed! I pm'd them on Nasioc inquiring about this GB and he quickly informed me that they had a slight issue and were working out the bugs for the LGT guys. I shot them over this link so they could update the Legacy guys too. Sure enough, here's the update. Great customer service and communication! Please keep us posted and thanks again Matt.

Soon enough there will be....... On that note, I'm not sure if I missed it in this thread, but do any other year WRX/STi's front strut bars fit? I know I read a post about the rear, but can't recall the fronts. And perhaps another question, if I upgrade my TMIC in the future are there fitment issues with said strut bar installed?

Agreed. In any case, I spoke with Odi this morning (great guy, very informative and answered all my questions without being biased....which I can truly appreciate.) He mentioned that they typically set these up with ride comfort more as a priority than performance. I'm guessing this is likely because if tracking the car or auto-x'ing, the owner would likely already come in with specific spring rate requests anyways. There must be a large market for "guys like me" that want to lower more than the standard inch or inch and a quarter that the majority of the quality springs lower the car. While at the same time want to keep somewhat "stock like" ride comfort without running the risk of getting beaten by their significant others. Looks like Feal is in the lead right now. Just waiting on some price quotes before I pull the trigger. I'm fairly certain that I'll be happy with either choice. The real fun is in the hunt!

Agreed. I'm just happy to know that there are reasonably priced options out there. I'm not super well versed in suspension set ups, but I know what works/feels good enough for me. I've personally had a standard BC set up and then a BC/Swift set up in my GS300 and was able to feel a nice difference just with how the Swifts helped to control and absorb bumps better. Not night and day, but noticeable nonetheless. I would imagine that being that this was only with the standard BC damper, that the Swifts paired with either the Feals or Fortune dampers would be another noticeable gain as well. That in itself will likely be right where I want to be. The main thing is that it passes the "wife and kids" test. Both will likely work well, I just need to pick one already! I'm going to try and call Odi this morning and ask a few more questions and hopefully order my coilovers by the end of the week. Thanks again for the honest feedback and setting of expectations. I appreciate it...

lol, exactly right. I went back and checked Fortune's website and they are in fact only put together here in the US. Thanks for the info on the Feals, that's exavtly the kind of feedback I was looking for. I'm just looking for a smooth and comfortable way to lower the car and minimize a bit of body roll. Not looking for a track monster at all.

Really? I've heard Fortune's are made and serviced in the USA? Either way though BC's are still in the running.....somewhat. The hard thing is that I've had good (well, still have good feedback with my GS) experiences with the BC/Swift combo and unfortunately don't have any first hand experience with the Feal's. Reviews are good, but like with anything else you gotta' take it for what it's worth, right. Either way, research is my friend.

Thanks for confirming that because I wasn't conpletely sure the differences. I tried emailing Odi this afternoon to ask some questions, but a vendor had mentioned to me that he can do a Legacy specific coilover, but that it just wasn't listed on their site. Once I hear back I should be able to make a decision. The Feals are just a touch more costly than the BC/Swift combo, but his reputation is pushing me a little more in their direction. Has anybody here tried the Feals on their Legacy's?

Haha thanks for the welcome! I'm a Legacy noob, but lived on Nasioc daily when I had my '04Sti and '04 WRX wagon. I'm considering BC's with the Swift upgrade because I have those on my GS and love them. They're fairly inexpensive and do a good enough job for my daily driving needs with that car, so I figured they'd work for the Legacy. Too. I had Fortune's on my LS430 with the standard Fortune Auto springs and wasn't as impressed as I was with the BC's. However with that being said I was thinking of possibly looking into the Feal 441's. Odi has a fantastic reputation and strong following on Nasioc, so that alone made me feel a little more comfortable. I've only started researching Legacy stuff for a few days now and am still trying to read through all the stickies. Realistically, I want to stay under $1500 for coilovers, so even though I know Kw's would be awesome.....they're not in the budget with 3 kids and living out in Hawaii. Ideally a set it and forget set up would be ideal (not big on messing with dampening too much) but I know I will not get the ride height I want with a set of springs and fixed perch struts. I'm a self professed wheel whore and fitment junkie so I need height adjustment. Tough choice to make on such an important component. I just need to read a little more and get some feedback from guys that have worked with this platform for a while. Thanks in advance for any suggestions or feedback, I always appreciate those who take the time to help others.

Legacy noob here. After reading through this entire thread last night, I'm not sure if I missed it, but can you chime in to correct me if I'm wrong? So are Coilovers from an '08+ Wrx a direct fit? I thought I saw something about the front top hats from the Legacy being different, yet I thought some people posted you can swap? Then I thought I read that the spring rates may or may not be ideal since most '08+ WRX Coilovers come with same spring rates front and rear? Is it one of those deals where it can swap, but may not be ideal?