Jump to content
LegacyGT.com

Turninconcepts

Members
  • Posts

    93
  • Joined

Turninconcepts's Achievements

Enthusiast

Enthusiast (6/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. not the crush tubes, but a thickness thing. Since you've got two kits out that address it you've got it covered.
  2. tranny crossmember bushings. One needs to be either thicker or a spacer bushing run as the 05+ LGT and 08 Imprezas have one bushing that is a bit thicker than the older setup. If this kit has a bushing that is a little thicker then it's good. If it's a kit for the older car setups then it won't work.
  3. Update from WL. Turns out they also fitted a set on a legacy last week, and made this discovery. they are going to be releasing an updated model listing in the next few weeks on what else will fit.
  4. yep - from what we can tell they are all the same dimensions for the R160 setup. I have some here as we're going to try them on the SVX.
  5. Ok - few things - Front control arm rear bushings - the 2008 Impreza ALK won't really fit without some work. Tony reminded me that someone tried the Superpro kit that all of you guys use on an 08, and the stack heights are different. Front control arm forward bushing - WL has a WRX and an STi version (they are different). One of them may work with the LGT. We need to crossreference part numbers. Rear subframe inserts - don't know. Anybody have pics of them? I can tell you pretty quick. Keep in mind that Tom@Kartboy has also released some doughnuts for that on the Impreza that may also work well for that location. Rear diff mount bushings rear of the diff - there's the WL inserts, there's the good old superpro press in bushings, and then there's the group N ones.
  6. on the front control arms - we think they should, but we have not confirmed for real, and haven't heard from WL on those. The kdt bushings are the rear diff kit such as you see there, and the rear subframe kit. The part numbers recently changed to the kdt naming scheme. I will ask WL to make a half kit.
  7. Yeah - that's the part I can't remember. That's why I want to slide under a car and take a look.
  8. That is the question. I'd like to have a local stop by as I'd like to check on these, and also these: http://www.iwsti.com/forums/how-install/129590-2008-whiteline-rear-subframe-bushings-w0598.html
  9. Here's what I'm talking about on these: http://www.iwsti.com/forums/how-install/128779-2008-whiteline-rear-diff-bushing-install.html
  10. Hey guys - Whiteline has released an insert kit for the 08 Impreza that fills the voids. We're wondering if it would also fit the leggy. Anyone want to swing by the shop so we can take a look?
  11. I mean solid compared to having no gaps on one side, and the other has very thin gaps. I have new new 2008 Group N catalog. I will check for replacements there. OD and tube thickness seems to be around 55mm. If someone has their legacy apart currently can they measure width. I believe they are around the same.
  12. Interesting discovery today - Pulled the cradle mount of the 08 to take a look. Seems the bushings on each side are different. One is solid, and the other has voids. IIRC, the LGT bushings are the same with voids on each side. Pics coming soon.
  13. have you tried to rip it off yet? Those Indiana farm boys building these things take a torque spec and quadruple it.
×
×
  • Create New...

Important Information

Terms of Use