Jump to content
LegacyGT.com

haruichi808

Members
  • Posts

    107
  • Joined

About haruichi808

  • Birthday 10/25/1987

Personal Information

  • Location
    honolulu,hawaii
  • Car
    2012 lgt
  • Interests
    golfing,playing pool,friends,family,and car stuff

haruichi808's Achievements

Enthusiast

Enthusiast (6/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. Nameless thank you for gathering all the facts I appreciate the effort I forgot to add I did have a turbosmart kompact on during my time cause I heard the stock one leaks, But also after my clamps came off during my tune we took the car off the dyno n on a lift to make sure everything was bolted up correctly n double check my ebcs And nvr touched it since, went back on the dyno and same problem then only switched the dp and midpipe n was able to tune with no spikes , So I hope Jarred can help you with the logs And if u also need the logs from the tune with the invidia pls email Anthony Barry from drunkmann tuning at his website I had to use a different tuner cause jarred only flys out to Hawaii a couple times a year n needed to fix the problem fast and Anthony was next available reputable tuner,.
  2. We all have been patiently waiting for test results and have been in contact with you guys , other than the 3 people that have good results with the gb downpipe,me n other have very similar issues, I sent you guys an email regarding how my tune went , and u replied and asked if I had a ebcs,and if I had oriented the dp as much as I could to the front of the car, n I did both, but orienting the dp towards the front should have been clear from the start seein most people will bolt it up. So I had a Grimmspeed 3port ebcs RacerX tmic and nameless axle backs,stock midpipe, and np dp With a Cobb tuner And had jarred from pdx tuning tuning my car I believe he is a reputable tuner and has been tuning subarus for over a decade and is a neighbor of yours, Pls email him for the logs he has them on his laptop under devin 2012lgt He has tuned a few subarus for me with good results Now during the tune once he would get into boost it would immediately jump to 24lbs of boost and hit 395 lbs of torque and even with his expertise n tricks of ways to combat it , it couldn't be controlled I had to pay for tune fee350,dyno fee 140 , and 750for the dp ,and 150 to install all wasted n not putting all blame on anyone, but there are others who have had massive overboost issues not just 1-3psi, pls try and email him thru pdx website for the logs I just want a refund I don't have the time or money to redo this n after that that already happened I had to get a new downpipe reinstall n pay for another tune that working with no issues, I was able to get a invidia catless dp used and all I changed was the downpipe n also added a nameless performance mid pipe ,and not touching anything else And was able to tune with no problems target boost 19.5 with no over boost issues n got 306whp and 356 flbs
  3. Just change the down pipe problem solved Any idea when nameless gonna test this damn thing so we can get our refunds
  4. OCT 12, 2016 | 11:22AM PDT Steven Redd replied: We are working on the issue as Ryan told everyone in the forums. We need to figure this out before we can do anything. Continually sending hate emails isn't cool either. We get it you guys are frustrated. We are all car enthusiasts man. We are trying to figure out what is going on its not like we are sitting here on our thumbs. This takes time. It just doesnt happen over night especially with how busy we are at the shop and how half the staff is away at racing events. This also includes English racing the people who tuned Ryans cars. They are extremely busy as well. The season just ended so now everyone will be here and have time to get this sorted. Please hold tight we will get ahold of you all once we figure this out.
  5. I ran my nameless dp with stock midpipe but had nameless axel backs But hits 24psi only half throttle, now I'm running catless invidia with nameless cat back n target boost 19.5 and in wot will only creep to 20.5 which is acceptable. I just can't wait to hear back on what nameless finds with the revised dp I have a paper weight of 700 bucks I want to return
  6. Just need a refund n go with a invidia or avo dp Having to mod it is redicilous
  7. Would it be possible to get the 300 horsepower model and add the sensor and second water pump?
  8. What do you guys think about the new Infiniti Q60 coupe? I guess there's three versions 2.0t Benz motor ahh but the twin turbo v6 two options it's say one is 300and 400 horse power and optional awd I wonder if it's the same motor for 300 and 400 how are they getting the extra 100 horsepower?? Possibly could get a 300 lightly optioned for under 50 At least cheaper than a Lexus rc And boosted
  9. Yes I did creep with temps in the high 80's to low 90's with np do n stock mid with np axel backs But now invidia catless with np catback target boost Is set at 19.5 and in wot it creeps to bout 20.4 once in a while 21.1 Not like b4 with np downpipe thing was hitting 24psi I hope nameless test the new version n can give us a refund
  10. When I was overboosting I was running my stock midpipe with 5" nameless axel backs Now running nameless catback From what I read about eleckseven and apex And from my experience I don't think anything would help with the overboosting except for changing the downpipe, With the nameless one no matter what my tuner did u can't fully drive or wot without it overboosting n no one wants to drive around out of boost for months like I did , n hats off to eleckseven I imagine he's been out of boost forever now and thinks his gt is a 2.5i
  11. I don't think weather has much to do with the over boost here in Hawaii it was mid day bout 90degress wgdc set at 0 and still hiting21-24 psi
  12. If more people contact them there maybe hope for some kind of refund instead of one or two guys complaining
  13. Looks good , just careful if you had to stretch to the end of the hoses the bead on the charge pipe is a little small n on dyno under boost may pop off, I had mine weld a bigger bead on it and now it's all good , good job though
  14. I've contacted them several times n reply back with excuses of install or boost creep of few psi is normal , mine just doesn't work n want a refund I sent two emails in the past two weeks now with no response
×
×
  • Create New...

Important Information

Terms of Use