Finally, pics of Whitetiger's car. (56k-go home now)
 

I dont know why, but i finally motivated myself to take some pics of my car and post them. I have 0 exterior or aesthetic mods except for 4300k HIDs so for the exterior shots you are seeing nothing much exciting.

http://www.youtube.com/whitetigerlgt -vids of car.

Pics removed, parts have changed.

Modifications

Engine+Transmission:
K&N Typhoon Intake
Invidia DP
GT Spec EL Headders w/3-bolt flage UP
Perrin TMIC
Perrin Mid/y-pipe
Prodrive mufflers
Perrin Pulley
Cobb Accessport v1 +TDC E-tune stage 2.5
Sti Radiator caps
ACT 6-puck Clutch kit w/ SL LWFW
Sti transmision mount
Sti short throw shifter
Crucial 160F thermostat
JDM STI 5mt Front Helical LSD -Hell Yeah!!!
AP Suretrac Rear LSD -Hell Yeah!!!

Suspension:
AST 4100 coilovers with F650LB/R700LB springs, aligned and corner balanced with Vorshlag camber plates.
Perrin 25mm Front swaybar
Perrin 25mm Rear swaybar w/ perrin and avo mount bracket reinforcements
Energy Suspension swaybar bushings and mounts
Cusco f+r lower armbars
Whiteline Polyurethane front and rear FLCA bushings
Sti front strut tower bar
4boxparts rear adjustable camber lower control arms
Whiteline KTA124 Rear Toe Arms
Whiteline anti-roll kit front ball joints and tie rod ends
AVO steering rack bushings.
17x8 +48mm OZ Ultralaggera with 245/40/17 Kumho ecsta XS -for the summer


Brakes:
Goodridge SS Brake lines
Front RacingBrake slotted rotors
Rear RacingBrake 316mm BBK Larger rotor conversion
Hawk HP+ pads

Exterior:
Chrome rocker panel trim
Sti Side kick panel trim
Sti Pedals
Xenondepot.com 4300K HID kit -Lowbeam
Xenondepot Xtreme 4300K HID kit -Fog lights
Fenders rolled/pulled

Autox Wheels and tires:
TRMotorsports 18x8.5 +48mm rims
Hoosier A6 R-compounds 255-35-18
KICS 10mm spacers in the rear for inboard tire clearance

Finally Josh you posted pics! Looks good! ;)

Noice!!! Wolf in sheeps clothing FTW.

Rust ftl.

I always assumed teh white tiger had a white Leggy

:whore: Badass!

i was expecting to see a white car :lol:

great job ftw!!

Sleeper stilo...very nice!

yep, the whole point was to keep it a sleeper. I even had to think twice about getting the slotted rotors. The more factory it looks on the outside, the better it is for me. I dont need ricers tempting me to race them, nor do i need to stick out for the police. Too bad it doesnt sound stock ;)

Youre running stock exhaust (DP back I mean) minus the electric cutout right?

right

So shouldnt it sound relatively stock with the valve closed?

Are those equal or unequal headers? (aka did you lose your burble?)

they are unequal length. However i dont have any heat sheilds on the exhaust anymore+having no cats makes the stock exhaust sound more throaty and raspy, even with the cutout closed. With it open, it sounds like a race car.

How do you like those 25mm sway bars? Comparison of how they feel vs. your previous pair?

nice car. :cool: bosco

Lookin good!!

Great car.