Subaru Legacy Forums

Subaru Legacy Forums (http://legacygt.com/forums/index.php)
-   Fourth Generation Legacy (2005 - 2009) (http://legacygt.com/forums/forumdisplay.php?f=10)
-   -   Tuning her up on the 2nd (http://legacygt.com/forums/showthread.php?t=206451)

roundthirteen 04-25-2013 02:42 PM

Tuning her up on the 2nd
 
I'm taking the Spec B down to http://www.pure-tuning.com/ for a pro tune. So far the car has-

Cobb Cat'd DP
Invidia up pipe
Magnaflow Cat Back
Grimmspeed Crank Pulley
Access port OTS 91stg2
AVO tmic
Turbosmart BPV

My Cobb ECBS will go on just before tuning.

Any guesses on numbers??? I'm not expecting anything great. She's run a 13.837 with a crappy driver and unhappy tune so far.

stuck686 04-25-2013 02:51 PM

263 awhp

Hemingway 04-25-2013 03:20 PM

265 awhp

SpecBFan 04-25-2013 04:02 PM

Ill go in the middle and say 264 awhp.:lol:

roundthirteen 04-25-2013 08:41 PM

Hah I can live with any of those.

mwm5094 04-25-2013 09:01 PM

240awhp

08SpecB_DE 04-25-2013 09:32 PM

sub'd

You have all the mods I would like to do (besides the pulley). Was there a benefit to changing out the uppipe since it does not have a cat in the 08-09?

a93x 04-25-2013 10:25 PM

What dyno do they use. I'll guess 280.

EJ25subie05 04-25-2013 11:03 PM

253whp

roundthirteen 04-26-2013 07:38 AM

Quote:

Originally Posted by 08SpecB_DE (Post 4406360)
sub'd

You have all the mods I would like to do (besides the pulley). Was there a benefit to changing out the uppipe since it does not have a cat in the 08-09?

I got it on the cheap from here and just threw it on while I was doing something else, I don't expect any gains from it.

Quote:

Originally Posted by a93x (Post 4406424)
What dyno do they use. I'll guess 280.

I think 280whp on a stock VF46 is a little high. The dyno is a Mustang MD-AWD-1100-SE

Anything is going to be more than the last time I dyno'd a car. My old Saturn (yes) SL2 STS autocross car was Dyno'd on a Dynapack to dial in it's Apexi Super AFC II piggyback (couldn't unlock the PCM) and it set down a blazing 141whp out of bolt on modified it's N/A 1.9lt..... Still 141whp in a 2100lbs car was umm "spirited" I'm trying to find a word between total let down and mildly quick.

lee07 04-27-2013 08:17 PM

Around 245 if a mustang dyno, always go in expected a lower number to come out happy

Shoot too high and come back disappointed

Go in expecting only 240

roundthirteen 05-02-2013 08:23 PM

1 Attachment(s)
After scurrying to get a few things done the night before tuning, I skipped the up pipe. So a basic Stage 2 (Turbo back/AP) with an AVO TMIC, upgraded BPV and Grimmspeed crank pulley.

The numbers-

255whp @19psi
322 ft/lbs

I'm pretty ok with that. I went in expected a 200whp knockfest, so with a low expectation any result seems good :)

I'll scan the graph when I get a chance.

Gex 05-02-2013 08:28 PM

Great numbers on a mustang with those mods. Any lwfwhl with the 6 speed? Any sae corrections?

roundthirteen 05-02-2013 08:32 PM

lwfwhl ok what's that?

Gex 05-02-2013 08:36 PM

Lightweight flywheel.


All times are GMT -6. The time now is 12:42 AM.


LegacyGT.com