Subaru Legacy Forums

Subaru Legacy Forums (http://legacygt.com/forums/index.php)
-   Detailing, Maintenance, and Long-term care (http://legacygt.com/forums/forumdisplay.php?f=56)
-   -   quality shop in ct (http://legacygt.com/forums/showthread.php?t=202611)

mdzowner 02-28-2013 08:22 PM

quality shop in ct
 
Hello,
i have had almost all my work done at IAG when i lived in md. now that im here in ct i need to find a shop to do some maintenance type repairs, specifically, i need to get my front axle replaced and possible wheel bearing. I dont need a tuning shop per se, but just a reputable one.
thanks

Custom Trendz Inc. 02-28-2013 10:10 PM

Motor services inc. In Hartford. Bunch of old timers. They helped me a lot during my head gasket install. They surfaced both heads for 50 bucks. Honestly only shop I didn't walk out of after speaking to the guy at the counter. It is a small shop, only one lift.

Sent from my Nexus 7

AZP Installs 03-02-2013 11:13 AM

In CT, EFI is good stuff. I'm not sure how far away Milford is from NNJ but we are about 30 min from the GWB. So it's worth it if you wanted to make a day of it and come pay a visit.

-Mike Paisan

http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/14...8/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg
11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

GTPpilot 03-02-2013 02:50 PM

Mike, how long would you typically need for a timing belt / water pump change ? Evaluating my options as 105k is coming up pretty quick on my car.



Quote:

Originally Posted by AZP Installs (Post 4320354)
In CT, EFI is good stuff. I'm not sure how far away Milford is from NNJ but we are about 30 min from the GWB. So it's worth it if you wanted to make a day of it and come pay a visit.

-Mike Paisan


AZP Installs 03-02-2013 03:24 PM

Quote:

Originally Posted by GTPpilot (Post 4320562)
Mike, how long would you typically need for a timing belt / water pump change ? Evaluating my options as 105k is coming up pretty quick on my car.

We can usually do a complete Timing Belt Service (The only way to do it by the way) in about 4-5hrs barring any issues. We do have a nice waiting room with a race simulator and Wifi :)

-Mike Paisan

http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/14...8/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg
11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

GTPpilot 03-02-2013 05:49 PM

Sounds good !! Thanks for the info !!

mdzowner 03-03-2013 06:38 AM

looks like they do mostly tuning and not as much maintenance. ill give them a call, if not mike your my man for the job



Quote:

Originally Posted by AZP Installs (Post 4320354)
In CT, EFI is good stuff. I'm not sure how far away Milford is from NNJ but we are about 30 min from the GWB. So it's worth it if you wanted to make a day of it and come pay a visit.

-Mike Paisan

http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/14...8/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg
11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"


jasejase 03-03-2013 07:34 AM

EFI Will be 45 minutes or so, from Milford. They are a great shop, and they do mechanical work in addition to tuning. I've gone there a few times for mechanical work and have never been sorry. They are well regarded around these parts! They are a bit expensive, depending on who you ask.

However, AZP Is also a great shop. I have driven to New Jersey before, to have them do the majority of my build. Excellent group of guys, and fantastic workmanship.


All times are GMT -6. The time now is 04:23 AM.


LegacyGT.com