Subaru Legacy Forums

Subaru Legacy Forums (
-   Member Classifieds (2005 - 2009) (
-   -   FS (NY): Engine, exhaust, suspension parts after rebuild (

mikeyd 01-15-2013 01:52 PM

FS (NY): Engine, exhaust, suspension parts after rebuild
20 Attachment(s)

I had to build a new engine for my 05 LGT after piston failure due to boosting under low fuel. This happened about 2 years ago and I'd like to free up the corner of my garage where the old parts sit.
The engine parts have about 61k miles on them. All parts were working fine when they came off my car with the exception of the block of course. The block (from what visual inspection can tell) has 2 shot pistons and lots of metal particles spread inside. As far as I can tell the block itself and crank shaft are in good shape. The heads have the old valves still which are mostly bent. All other engine parts may need cleanup but should be in working order. I'd hate to drop a rebuildable EJ255 off at the recycle/scrap yard for destruction.

I accept PayPal or cash for local sales. All items plus shipping and possibly the PayPal 3% fee if paying by PayPal. Make me an offer on any part or combination of parts.

Available Items:
OEM Engine Parts
  1. EJ255 Short-block with crankshaft
  2. 2 heads (with most valves and other valve parts (springs, clips, etc)
  3. Oil cooler
  4. Oil pump
  5. Oil pan
  6. Thermostat
  7. Water pump
  8. Oil pickup tube
  9. head bolts

OEM Exhaust parts

  1. Up-pipe- $50 + ship OBO
  2. Headers

Other OEM parts
  1. Dual-mass flywheel (and clutch disc) (61k miles)
  2. Intercooler - $50 + ship OBO

    Also have
    stock the air box and shift mechanism from a 2003 WRX
Sold Items

  1. Exhaust (less then 23k miles)
    downpipe/cats -- SOLD
    - y-pipe, mufflers
    -- SOLD
  2. Front/rear swaybars -- SOLD


c-lo 01-15-2013 01:55 PM

we'll need some pics

mikeyd 01-15-2013 01:58 PM

8 Attachment(s)
Yessir.. I'll be working on that tonight/tomorrow...

EDIT: Few more pix:

mrk610 01-15-2013 02:03 PM

Looking for the mid pipe from the flex connector with the y to the dual mufflers.
Looking for my 06 outback my y split.

mikeyd 01-15-2013 02:09 PM

That might be an interesting piece to ship unless you feel like taking a drive. But I do have the full stock exhaust. Replaced my exhaust with after-market early on doing Stage 2. Just looked at my maintenance records, it was at 22k.

mikeyd 01-16-2013 09:10 AM

Photos uploaded... more can be taken upon request.

mikeyd 01-25-2013 08:33 AM


DocHolladay23 01-25-2013 11:35 AM

I'm sure it would be a pain to ship, but how much would you want for the block as-is shipped (if you're willing) to 84094?

mikeyd 01-25-2013 11:45 AM

Just shortblock or with heads?

DocHolladay23 01-25-2013 11:59 AM

Just the block.

mikeyd 01-25-2013 12:07 PM

Off the top of my head... $300?? plus I think it will cost maybe $150 max to ship (UPS ground). I'm a very reasonable guy so, let me know what you think.

mitchw 01-27-2013 09:52 PM

sorta interested in the block but im going to want the full block including the heads

mikeyd 01-28-2013 07:25 AM

Well I guess PM me with an offer and/or questions about the damage if you have any. I havent sold either yet. Thx

JLW7123 01-28-2013 09:34 PM

How much for the headers sent to 04038.

mikeyd 01-29-2013 08:50 AM

I'll have to weigh things to get better shipping estimates. Lets say $40 + shipping (probably less then 30).

All times are GMT -6. The time now is 10:16 AM.

vBulletin Optimisation provided by vB Optimise v2.6.3 (Lite) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.