Subaru Legacy Forums

Subaru Legacy Forums (http://legacygt.com/forums/index.php)
-   Member Classifieds (2004 and older) (http://legacygt.com/forums/forumdisplay.php?f=103)
-   -   FS (UT): 99 Wagon Partout (http://legacygt.com/forums/showthread.php?t=195864)

overspool 11-05-2012 08:37 AM

FS (UT): 99 Wagon Partout
 
12 Attachment(s)
I apologize for PMs piling up, and no-response. I stopped receiving email updates about a month ago for some reason.

WEATHER IS WARM. SHOOT ME AN EMAIL OR TEXT IF YOU WANT PARTS.

email or text for best response. email- devincrezeemusic@gmail.com, or text 6 OH 2 6 ATE 9 OH 4 SEVEN 2.

My legacy wagon got rear ended, and now it is totalled. I've got quite a few good parts on it that I would like to sell.

Available Parts:
Cusco Vacanza Rear Sway Bar (specific for 95-99 Legacy)- $120 shipped!
Kartboy Rear Endlinks (need to buy 2 bushing kits)- $40 shipped
Tanabe GF210 Springs on 06 WRX struts (one strut may be bent) $100 picked up, or $150 shipped.
Charge Speed front bumper (paint matched to your OEM color) and JDM bumper beam- $450 picked up
JDM Foglights (the lens on one of them is broken, so really you're paying for one good one)- $40 shipped, $30 picked up
JDM Legacy Grill- $100 shipped
USDM GT hood- $120 picked up
Windshield Wiper Deflector- $25 shipped


Sold/Pending:
STI Master Cylinder- pending 907bum on nasioc
STI Diffuser- pending 907bum on nasioc
Cusco Rear Subframe Brace- pending 907bum on nasioc
Bugeye WRX front seats- sold to kentrik on Nasioc
Group N Pitch Stopper- pending 907bum on nasioc
Front Brakes- came off of 01 outback, 2 piston calipers (BRAND SPANKING NEW CALIPERS, literally I just bought them like 2 weeks ago) with some used pads and used rotors, probably on their last resurface- sold
Driveshaft- sold
Cobb Short Throw Shifter- sold to ikerex on slcsubaru
2 Ichiba 5x100 +25mm Hub Centric Bolt On Spacers- sold
Full 5 speed swap for Impreza/Legacy. Typical Subaru 5 speed, has the infamous 1st gear synchro whine when putting it into gear. no problems while driving. Missing driveshaft. Comes with...
Manual Trans
Crossmember
Trans mount (might be Group N. I'll check once I get it out)
STOCK shifter
Pedal Set
Mechanical clutch/cable clutch
Rear Diff
Axles (Front axles are less than a year old)
SOLD
Cusco Master Cylinder Brace (02-07 Impreza, 93-01 impreza with some modification- you need to drill 2 holes in the fender well, as well as 95-99 Legacy. Comes with all the hardware)- sold
Door Tweeder speakers (OEM)- sold
JDM Headlights- sold

This car is the 30th anniversary edition, aspen white. It came with the full black interior, the door panels have been wrapped in black suede, and the carpet has been dyed black. I dunno how much interior goes for, but it's in pretty good shape. Shoot me an offer if you're interested in interior parts. All of the features of the Limited have been transferred onto this car, minus the leather door panels and the keyless entry. Windshield wiper bug deflector, tweaters, premium door speakers, etc :)

Picture of door panel.
http://i6.photobucket.com/albums/y24...-57-33_296.jpg

Most of the body is in decent shape, except the rear bumper and back right quarter panel. If you are interested in body parts, shoot me a pm with what you want, I can snap you a picture and send it to you.


I am waiting on registration for my new car, so the necessity parts to keep it driving will stay on the car for the next week or so (trans and such) until that comes. But after that, EVERYTHING will be coming off and I will have pictures up.

And just for some inspiration... this is what my car looked like before the accident.

http://i6.photobucket.com/albums/y24...2Seventies.jpg



edit edit: man this stuffs is going fast. a ton of it will be gone this weekend, I'll update once those parts clear out, and see if I can upload more pictures. All of my photos are the same size, so I dunno why it won't allow me to upload most of them.




NOW WILLING TO SHIP SWAY BAR AND SUSPENSION PARTS.

c-lo 11-05-2012 02:14 PM

OP all for sale parts must have pics loaded using the manage attachment tool. please load them within 24 hrs or your thread will be closed until it's done.

if you have questions please ask.

Kennyfvholla 11-05-2012 02:40 PM

I want the Whiteline roll center kit. Also, do you have any shifter linkages that you're willing to sell separtately from anything else? My shifter slop is getting ridiculous because something broke and it harded to get into gears.

PM sent.

Makster 11-05-2012 03:27 PM

Here's what I'm looking...
Ac compressor, power steering rack,
BTW how much the door panels?

98legwag 11-05-2012 04:42 PM

What size is the rear sway bar?

Wiclipse95 11-05-2012 08:54 PM

I'm interested in the rear sway bar and end links. Sorry to here about your misfortune, it looked really good. What front bumper is that?

overspool 11-05-2012 11:16 PM

Some pictures added. Site won't allow me to upload more atm.

The thickness of the sway bar doesn't matter... it's one of like 5 in the US currently :) And it was one of the few that was actually designed for our cars.

Wiclipse95- It's a legitimate Chargespeed front bumper. I haven't found another like it anywhere, let alone in the states. My roommate has a 95 Legacy that will most likely be getting the entire front end :)

Wiclipse95 11-06-2012 06:30 AM

I can't tell in the picture, did you have the JDM fog lights? I did actually find that bumper but it didn't look like it matched up very well with the fogs. I'm not willing to part with those however that bumper is sick. Where you wearing both?

Wiclipse95 11-06-2012 06:32 AM

What did you use to dye the carpet?

overspool 11-06-2012 08:17 AM

I've got JDM fogs on it, they match up pretty well. The holes for the fogs might be a little large (They don't fit snug like OEM) but it's still a good fit.

The previous owner dyed the carpets before I bought it, I'm not sure what he used. But it hasn't turned blue in the 60k I've put on it in the last year and a half.

98legwag 11-06-2012 04:13 PM

Quote:

Originally Posted by overspool (Post 4146104)
The thickness of the sway bar doesn't matter... it's one of like 5 in the US currently :) And it was one of the few that was actually designed for our cars.

Umm the 19mm and 21mm versions would make the car handle differently.

SBT 11-06-2012 08:25 PM

Quote:

Originally Posted by overspool (Post 4144775)
And Moderators, the site "photo upload" sucks. It won't allow me to upload all of the pictures of my parts.

You can upload all photos, just make sure that you're not "oversized" since there is a photo size restriction. .jpg = 500.0 KB, 3200x2400

SBT 11-06-2012 08:26 PM

What color are your sun visors and do they have lighted mirrors in both sides?

overspool 11-07-2012 05:47 PM

They are tan, and neither of them are lighted.

overspool 11-07-2012 05:47 PM

Quote:

Originally Posted by 98legwag (Post 4147342)
Umm the 19mm and 21mm versions would make the car handle differently.

As far as I know, there is only one available from Cusco. I will double check. It is adjustable, so that might make a difference.


All times are GMT -6. The time now is 02:45 AM.


LegacyGT.com