Subaru Legacy Forums

Subaru Legacy Forums (http://legacygt.com/forums/index.php)
-   Fourth Generation Legacy (2005 - 2009) (http://legacygt.com/forums/forumdisplay.php?f=10)
-   -   Dents and Dings (http://legacygt.com/forums/showthread.php?t=190741)

360 08-05-2012 03:12 PM

Dents and Dings
 
I have done the absolute best I can to keep my Outblack as nice as the day it rolled off the assembly line. However, others have seemingly made it a priority to add some custom features to the sides of it. I have 5 door dings on my car. It pisses me off royally each time I get a new one, and I've never caught anyone doing it. They better hope I don't either. I don't understand why it's such a magnet for careless and inconsiderate people. I can drive my beater F150 anywhere and it's never so much as received a scratch from a parking lot. What's the best way to pop them back out?


Sent from my tacticool mobile station Delta.

Max Capacity 08-05-2012 03:31 PM

Watch the local forums for a car meet where they have a guy that removes dents. I had a few removed last Aug for 40.00.

Or call the dent wizard or any number of companies that remove dents.

360 08-05-2012 04:03 PM

What sucks is that it'll likely happen again.

Sent from my Nexus 7

rps13de 08-05-2012 04:55 PM

Yeah, it will happen again, it did for me. I had my whole car PDRed when I got it. Check with local body shops. They usually have a paintless dent removal guy.

iNVAR 08-05-2012 05:42 PM

1) PDR
2) I think our cars use thin sheet metal... more susceptible to dents/dings.

lee07 08-05-2012 05:46 PM

Just leave them for now until hail comes and then maybe you can have it all done and paid for by your insurance comp. Minus deductible(Mine is $50, was free)

I have a few and that's when I'll go get it fixed

Rusty9 08-06-2012 10:12 AM

Dry ice works well!

liljonson 08-06-2012 11:01 AM

Subscribed!

Berzerklo 08-06-2012 11:58 AM

There is a video on youtube that uses a can of compressed air (turned upside down so you are really cooling the sheet metal with compressed CO2) & a heat gun to get dings out.

I tried it on a large ding on my moms Volvo with no success. May be worth a shot since it is super cheap!


dr_sharp 08-06-2012 06:33 PM

Thats bill nye shit right there.

700watts 08-06-2012 06:55 PM

dude, the sheet metal on our rides in ridiculously thin. I feel your pain..

.:Catalyst:. 08-07-2012 10:56 AM

^ :whore:

08 LGT 08-14-2012 02:49 AM

Quote:

Originally Posted by iNVAR (Post 4013740)
1) PDR
2) I think our cars use thin sheet metal... more susceptible to dents/dings.


That and his F-150 is probably a good bit higher off the ground and out of the way of the bottom of neighboring cars' doors.

360 08-19-2012 11:06 PM

Yeah, my F150 is a tank. I await the day someone rear ends it and gets a load of the hitch knuckle that is on there. It will be the biggest win ever.


All times are GMT -6. The time now is 12:45 AM.


LegacyGT.com