smokee_won Posted January 29, 2013 Share Posted January 29, 2013 I just sent Grimmspeed my new in the wrapping VF46. I asked them to flow bench it to get a cfm. I haven't found a chart for one nor any static cfm data. Since I've seen cfm on almost all the other VF's we have for our Scoobies I want to see where our 46 stacks up. I will post it when I get it as I am sure Grimmspeed will let any who are curious know as well. I want to know before I pick my injectors and pump. Link to comment Share on other sites More sharing options...
bigjweb Posted January 29, 2013 Share Posted January 29, 2013 My guess is around 400-420 cfm Link to comment Share on other sites More sharing options...
smokee_won Posted January 29, 2013 Author Share Posted January 29, 2013 Hold that thought as I am thinking the same but knows. Link to comment Share on other sites More sharing options...
bigjweb Posted February 22, 2013 Share Posted February 22, 2013 any updates? Link to comment Share on other sites More sharing options...
smokee_won Posted February 28, 2013 Author Share Posted February 28, 2013 I am sorry. I was not able to get any flow data. The tight turnaround the dealer required for me to get the VF46 back them prevented it being but on the bench. I do have to give it up to Grimmspeed for the quick work. What ever it was flowing before the port work, there is definately a difference now. My seat of the pants acceleromoter is registering a change in when the boost starts. I cannot do a full pull because I am still breaking everything in from the rebuild. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.