korpsepatrol Posted April 1, 2013 Share Posted April 1, 2013 I tried installing the Torque Solutions Driveline Carrier Support Bushings this weekend and found that the bushings that were already installed were semi solid on both ends nothing like in the following video. When I tried to "gently" remove the bushing like in the video there was NO PLAY on the center metal collar. This made it so that the bushing could not be separated at all. I wanted to know if anyone with Spec B has tried installing this mod and if they had success with it? Side note: Just installed their Pitch Stop Mount this weekend and wow I could not believe how much slop and bounce that eliminated in the engine bay. Group N Engine Mounts to be installed this or next weekend. Parts Installed so far on drivetrain/transmission are: Group N 6mt Transmission mount Group N Cross member bushings Perrin 6mt Front Shifter Bushing Kartboy 6mt Short Shifter Karboy Rear stay bushing Torque Solutions Pitch Stop Mount 2008 6mt Legacy Gt Spec B DGM - Not so Stock/Work in progress 2006 5mt Legacy Gt OBP - Sold 2005 5eat Legacy Gt OBP - RIP R.I.P Coxx Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.