Jump to content
LegacyGT.com

RedDawg

Mega Users
  • Posts

    754
  • Joined

3 Followers

About RedDawg

  • Birthday July 18

RedDawg's Achievements

Experienced

Experienced (11/14)

  • First Post
  • Collaborator
  • Posting Machine Rare
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. about to have my clutch replaced, i already have a TSK3 kit on there, just wanted to double-check that i need to order the new bearing from one of the links above right?
  2. just ordered 2-T's cant wait to get them and replace my crappy boost gauge T
  3. I put together an ebay DIY TMIC kit last year, and I couldn't find a proper flange last year for it so I welded a pipe onto a stock piece of metal, then just rounded the edges off and drilled the bolt holes. I'd like to clean it up a bit this spring with a proper flange. And maybe i'm calling it by the wrong name but i'm looking for a piece that's what's circled in this pic: http://i39.tinypic.com/2agohs0.jpg
  4. I need the actual flange. thanks for the tip though.
  5. looking forward to getting tuned in probably march through you, I was e-tuned last year from another vendor on here and am unhappy with the results. In your opinion, is it worth it to go FMIC on the stock turbo if i'm planning to upgrade to an 18g eventually, or just stick with the TMIC and add a FMIC at the time of the turbo upgrade
  6. even though i love my stromung and greatly appreciate the effort put forth into the orig GB, i would never, ever, not even under gunpoint, want to deal with them again due to their shady actions.
  7. i'll have a BP kit, unused but cut to size with all bolts, coming up for sale soon. decided to go with an ebay TMIC kit instead.
  8. well, dont i feel sheepish. i couldve sworn it said to turn the car on though when i hit the "read ROM" button.
  9. i tried this method on my win7-64bit laptop (using the latest ecuflash), and it finally connected to my ECU, but when i went to read the current ROM with ecuflash, the car would stall and wouldn't restart until i unplugged the vagcom cable. Nearly crapped my pants thinking i bricked it.
  10. bottom right for me says USB <-> SERIAL. I continued with the installation instructions, everything else matched, but ECUFlash doesnt connect to my car when i tested everything. any suggestions?
  11. just be careful when u set the dremel down if you're constructing it on a table like i was. I had a towel down to protect the table, didnt let the dremel finish spinning and it snagged the towel..... metal shavings and pieces of the BP kit EVERYWHERE!!!!
  12. i used a metal cutting wheel on my dremel and it worked just fine to make the kit.
×
×
  • Create New...

Important Information

Terms of Use