Jump to content
LegacyGT.com

MaStaMooN

I Donated
  • Posts

    1,000
  • Joined

About MaStaMooN

  • Birthday 02/12/1979

Personal Information

  • Location
    Central NJ
  • Car
    TDC Stage2+ 05 LGT (RIP 8/1/2019)
  • Interests
    Cars, Computers & Money
  • Occupation
    Systems Admin

MaStaMooN's Achievements

Mentor

Mentor (12/14)

  • First Post
  • Collaborator
  • Posting Machine Rare
  • Conversation Starter
  • Week One Done

Recent Badges

0

Reputation

  1. Tossed some stuff.. sold the uppipe/downpipe for 800 (low but hassle free), sold the stock catback (120) and the jdm kit (200). So all I have left is: Injectors (DW740 sidefeeds bnib) Fuelpump + Housing JazzyMT kit Tierod ends shroud stock springs stock intercooler vf40 So more than doubled my giveaway price. Not bad for a bunch of garbage nobody would want. If I can sell these injectors, the rest will probably just go in the trash.
  2. So I should be asking more then??? Is that what you are saying cuz your post kinda contradicts itself. You're saying the downpipe is worth one of those GPUs that currently sell for between 600 and 1600.. The jdm kit is worth selling, the walbro will sell, im sure the injectors will sell.. But nobody will buy it for 500? Which is it? Look, I'm sure its all worth or not worth something.. I am paying for the convivence of somebody showing up with a truck and hauling it all away for me. Maybe I will call the local junk yard tomorrow about the downpipe. Thanks for the advice. Thanks for the replies
  3. Hey Ya'll... So my car was wrecked over a year ago and I had a bunch of stock parts and random other parts that I never installed or I removed from the car after the wreck. I dont want to deal with ebay or shipping/selling them one off at a time. But I need to get them out of my garage(s). Take a look at the screenshot, this is the list of stuff I need to get rid of. Im hoping somebody with more time/energy would take this stuff off my hands. Here is an album of all the stuff. Better or specific pics can be taken upon request. I believe between the walbro, injectors, jdm kit and all these things, there is some value here. I am asking 500 bucks for EVERYTHING. No shipping or deliveries. I am located in Brick NJ, about a mile (if that) from exit 91 on the parkway. Stock exhaust is complete and in one piece but in a different garage, but still in brick, only another mile or 2 down the road. I think it has less than 30k miles on it. Would be willing to trade for a current generation GPU (nvidia 30 series or amd 6700/6800/6900 series). https://photos.app.goo.gl/zqvu44JXKJBdddMZA
  4. Yeah that doesn't look good at all. Hopefully it can be worked out because this looks like an awesome upgrade.. probably drive down the cost of brembo swaps also!
  5. Is it me or does it look like the pad is only contacting the outer half of the rotor? Is this what STI brembos also look like on our cars?
  6. What is are the correct percentages of the TPS, when the car is off? I noticed mine wasn't near 0% nor near 100% last time I had Torque running and checking on things. My last car the percentages were like 5% and 95% with anything above or below that meaning a fault. I think mine showed like 15% and 75% or something possibly.
  7. MCM is the only thing on YouTube I consistently watch and check for new episodes.
  8. Thanks to the OP for enlightening me to MCM... only show I actually watch consistently on youtube.
  9. Spotted a DGM(i think) Spec.B on the GSP this morning, around the Brick area around 7:45am or so. Looked stock.
  10. Decided to do a PS fluid change the 'easy' way by pulling out the old stuff, replacing with the new stuff and driving/running hte car for a bit. This is what I was pulling out vs what I was going to put in. Nasty. I did about half a quart on saturday, probably do the other half this next weekend. See what the fluid looks like in a week or 2. This was at 104k miles.
  11. spotted panicrev (http://legacygt.com/forums/member.php?u=48833) this morning on Cedarbridge Ave in Brick. Has an unmistakeable license plate.. http://i46.photobucket.com/albums/f104/panicrev613/DSC00257.jpg
  12. Welp, I got it back in. Ate some dinner then headed back out there... clipped the big clamp and pushed it back... saw why I couldnt get it back in. The part that the axle goes in was all cockeyed so no wonder I couldnt pop it back in. I felt the clip at the end of the axle was still in there, so I managed to monkey around with it enough to get it seated fully and then had to wrestle the strut back into place. Going to try and find one of those clamps and hopefully get it in there without taking anything else apart! All done!
  13. http://img.tapatalk.com/d/14/04/13/9a9e6ahu.jpg**** my Life! Driverside front went in without a hitch. Passenger side was much more of a nightmare... Removal and disassembly and reassembly of the strut went fine. Went to go put it back in and the strut seems almost too long, specially compared to the driver side. So I took it back out and double checked my work. All was fine, put it back together and tried to install again. Finally figured out how to wrestle it into place. Thought all was well, put the wheel back on, but as I was tightening the lugs I realized my wheel was spinning freely.... :::SCRATCH HEAD::: So I pull the wheel off to double check everything and it turns out the axle fell out of the hub. Ive spent about an hour now trying to wrestle it into place, took the strut back out.... still cant get it to go back in. Turning the rotor a bit trying to match up those splines is not working well. WHY ME! Was going too easy. Does anybody have any idea how to fix this without taking the whole hub apart or popping the hub off the lower ball joint? FML FML FML. Im guessing I will need to take the boot off at the very least. Does a place like AutoZone carry the weird clamps they use to hold the boots on?
×
×
  • Create New...

Important Information

Terms of Use