alrite you guys, just did this mod - took me about 2 hrs since i was pretty meticulous about the wiring and making sure that everything was sealed together pretty good.
i used this as a guide, but i realize that this mod may be a tad vague for beginners.
anyway, i did this for a 2010 and damn the clear ring made it look pretty bomb at night
anyway here are pics + some add ons to the OP's instructions.
hopefully this will take off some anxiety off people that are scared of tapping into existing wires or what not
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0585.jpg
aside from the household tools i used (scissors and some leftover wire) this is all you'll really need if you wanna go hardcore and solder everything together - these 3 things cost me like $8...if u wanna just ghetto tape everything up - then i guess e-tape LOL
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0586.jpg
i decided to shave the LED with a nail polish (the step 1 2 3 4 that makes your nail shiny HAHAHA) and it helped with the spacing issue of the LED+LED holder in the 2010 model leggy
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0590.jpg
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0587.jpg
as you can see, the spacing is kind of an issue - especially since the clear ring is where the OP had his LED holder put...so i got creative
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0588.jpg
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0589.jpg
yummm heres that clear ring that everyones jealous of
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0591.jpg
so here i am getting ready to solder it all up!
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0592.jpg
ehh good enough LOL
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0593.jpg
okay so i pretty much sealed the top and bottom up of the enclosure and stuffed it with cotton - it helps keep everything in place and i made sure that the LED stayed in place and yepppp
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0594.jpg
cotton stuffing!
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0595.jpg
so just cleaning everything up and making sure the wiring is clean
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0596.jpg
i tied up my wires with some original ones because there still is a moving shifter so i dont want my wires to get tangled up in that - so its safe to just route with the original wires
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0597.jpg
alrite so the OP had a 2nd post of him tapping into the 2nd wire - well i just looped my wire and routed it behind the purple wire of the brown connector (passenger side seat warmer) and just e-taped it up so it wouldnt move.
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0599.jpg
similar tactic with the black wire - i decided to be lazy and just wire the negative into this socket because it was available but the purple wire was so the cup holders would light up with everything else - and not when the car is put into position 2 (which is when the 12v socket turns on)
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0601.jpg
here we go!
http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0602.jpg