Jump to content
LegacyGT.com

zisforzachary

Members
  • Posts

    109
  • Joined

Personal Information

  • Location
    N. Seattle
  • Car
    05 Leg GT sedan//74 RD250//Cilo 10 speed
  • Occupation
    student

zisforzachary's Achievements

Enthusiast

Enthusiast (6/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. Picture is of actual wheel/tire set up for reference
  2. Does anyone know if a 215/65/16 wheel/tire set up will fit on a legacy gt? Found a sweet set of sparco Terra's but I don't know if the tires are going to be too big
  3. I'm not too worried about the speedo quite yet. If you use 1010tires.com and go to their tire size calculator it'll tell you what the difference is @ 60 mph which is helpful. from there you could make reasonable judgements by creating a linear scale of how fast you were going based off of your 60 mph speed. That though is down the road and I'll worry about that after I get some tires.
  4. Hey Guys, So this is a bit unusual, but I went up instead of down on my legacy. Im looking for something a little more off-road friendly. At this point I've swapped the struts/springs/bits on my legacy gt for some outback pieces. I then also put a some subtle solution spacers on it to give the car another 1" lift. Essentially I'm asking at this point what your thoughts are for a wheel/tire set up now that i have more room to make things happen. Pictures for reference on how much clearance I have now (actual car)
  5. how the hell did you get those bolts out? cant for the life of me find a socket deep enough
  6. to pull this bolt out do you just use a deep socket back it out like the nut? or does it have reverse threading?
  7. hmmm... okay do you think that the bolt on the legacy gt is just shorter overall though? from what I remember after examining the bracket, it didn't appear to be bent or manipulated in any way. all of the bends in it looked like it came that way. I'll take it off though this afternoon and take a better look at it. I'll also look into the spacer situation and see if I can't track anything down. Thank you all for the feedback
  8. Yea, legacy to outback I noticed the bushings after I put the car back on the ground, they weren't showing before And isn't that a legacy mounting bracket and not an outback one?
  9. Hey guys, Recently I swapped my Legacy GT struts and springs for some 2009 Outback wagon struts and springs. Now looking at the kit I got it looks like I have the rear mounting bracket on the front lower control arm assembled incorrectly. Could any of you help me out with a picture of what your assembly looks like? attached is a pic of mine:
  10. Okay can someone tell me where this goes within the front suspension setup? Going back up and I can't remember/figure it out
  11. picture request for a 18x8.5 rota gravel (hyper black if possible) on a 4th gen legacy. thoughts/reviews on this set up??
×
×
  • Create New...

Important Information

Terms of Use