Jump to content
LegacyGT.com

joop1987

Members
  • Posts

    36
  • Joined

Personal Information

  • Location
    Mercer, NJ
  • Car
    2013 FR-S
  • Interests
    Cars
  • Occupation
    Engineer

joop1987's Achievements

Apprentice

Apprentice (3/14)

  • First Post
  • Collaborator
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. 2008 LGT 5EAT @ Atco NJ with Infamous1 Stage 1. (The line was long and intercooler was hot). 60: 2.270 330: 6.260 1/8: 9.616 MPH: 73.52 1000: 12.489 ET: 14.952 MPH: 91.43 Here's a video: https://vimeo.com/42811623
  2. I used a dremel with attachment A576. Use the fiberglass Reinforced Cut-Off Wheels instead of the drum sanding wheel that come with it. The attachment makes it very easy to adjust the height. Go back and forth when cutting and the line will be very straight. You will need about 2 wheels per edge. Very messy and very time consuming but it does cut good. http://img856.imageshack.us/img856/5408/asdft.jpg http://img823.imageshack.us/img823/4213/img20120126183545small.jpg Uploaded with ImageShack.us http://img576.imageshack.us/img576/126/img20120126183642small.jpg Uploaded with ImageShack.us http://img401.imageshack.us/img401/1200/img20120126184042small.jpg Uploaded with ImageShack.us
  3. SeeeeeYa, Can you post the plans online? If you just have hand drawn dimensions I can get them into AutoCad and share the drawing. I just need the lengths and hold locations.
  4. Anyone know the part number for the U-Channel? Where is everyone getting it from?
  5. I got the pleasure to replace my O rings today. I thought the front drivers side was impossible. I found it much easier with the air pump removed, the air pump bracket removed, and remove the bolt holding the metal shield (see yellow arrow below). The only way to put the O ring in is from the front (where the air pump used to be). Took 2 hrs. http://img502.imageshack.us/img502/6899/asdfpr.jpg http://img7.imageshack.us/img7/1104/img20120107142521.jpg
  6. Use a Tactrix V1.3 or a VAG-COM cable. FreeSSM does not work with Tactrix 2.0 If you don't have one, get a VAG-COM KKL 409.1 from Ebay. I purchased this one: http://www.ebay.com/itm/290637412911?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 Download FreeSSM: http://developer.berlios.de/projects/freessm/ If you have problem installing the software or want more info on FreeSSM see this thread: http://www.subaruoutback.org/forums/65-parts-accessories-performance/39426-freessm-complete-access-your-ecm-tcu.html Click on the Clear Memory 2 button. http://img861.imageshack.us/img861/4219/freessmafterreset.png Uploaded with ImageShack.us
  7. Try resetting the TCU. All you need is a cheap $15 Vag-com cable. Can't hurt.
  8. If you have a VAG-COM Cable you can also use FreeSSM on 07+ CAN bus TCU. Today I reset my TCU on my 08LGT because of a slight jerk in 2-3 shift. No more jerk! I'll see how long this lasts. If it comes back, it's going to the dealer for the 16-72-07 Service Bulletin (Automatic Transmission Learning Control Procedure).
×
×
  • Create New...

Important Information

Terms of Use