Ok time to whore out my new retro setup. The setup is the same RX330 non-AFS i've been using but I now have LED light strips in the headlights acting as my DRL's.
[ame=http://www.youtube.com/watch?v=K-ikEb5fYp4]YouTube - LED DRL setup (2008 Subaru Legacy 3.0R)[/ame]
And a second video:
[ame=http://www.youtube.com/watch?v=hoYfRdMVUQ0]YouTube - LED DRL additional (2008 Subaru Legacy 3.0R)[/ame] This setup was made by first disabling the DRL module in the cabin of the car. I then setup 2 SPDT relays which when the relay is in the normally open more send power to the LED's which then act as my DRL's. When I turn the headlight switch the relays become charged and power is directed towards the HID Ballasts. I am currently running an RX330 non-AFS retrofit with Celica clear lenses.
The two relays get their power from a third relay which is activated by a 12v ignition switch in the fusebox of my engine bay. This way the DRL's will turn off when the car is off. This was the biggest problem when figuring this setup up but thinking back on it the solution was simple.