Jump to content
LegacyGT.com

Roke

Members
  • Posts

    54
  • Joined

2 Followers

About Roke

  • Birthday 07/17/1979

Personal Information

  • Location
    the Netherlands

Roke's Achievements

Contributor

Contributor (5/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. I have Koni yellows. Front at 50/50 (soft/hard) and a quarter turn stiffer (because wagon) in the back. Prova springs. The drop is approx. 0.6 inch in the back and 0.8 inch in the front. Maybe the drop became a BIT more after a while. I posted the pics at the top of this page. Here's a better view of the current ride height: http://myalbum.com/photo/9jo2afVb53oa/360.jpg (225/40/18" tires) Never had any problems during daily driving while there's A LOT of speed bumps here in the Netherlands. It's clearly stiffer than OEM, but still a very comfortable ride. I turned them all the way to full stiff for just one day. Annoyingly bouncy! NOT recommended.
  2. http://myalbum.com/photo/18GUFO8EK3ni/360.jpg http://myalbum.com/photo/0M71m5r4dbM2/360.jpg http://myalbum.com/photo/dLqqCthT6f1m/360.jpg http://myalbum.com/photo/isiWbeIxxEIN/360.jpg
  3. Thanks for the link to your mod! I came across that topic while searching for exhaust options. I used Hamerite heat proof paint. I'm also wondering if it will hold. I actually had to paint them because the previous owner did that too. I painted the back of the rusty muffler on my mother's Fiat Panda almost a year ago to test it. That still holds up fine. But I didn't paint the back of my stainless mufflers I had before because I thought that surface wouldn't hold the paint for long. I had a Invidia Q300 catback for some years. That looked and sounded great, but since my Legacy is N/A it became way too loud, even with silencers in each tip. The fact that my Legacy is a wagon didn't help much either. I did try to block out some exhaust sound by isolating parts in the trunk and rear hatch, but that didn't help much. So I decided to go back to stock. I did that yesterday. http://myalbum.com/photo/MThhSSp5RjwC/360.jpg It's quiet like a walk in the forest now, but to be honest I like it. My wife likes it even more. I still have a bit of a rumble because I have the RalliSport Racing UEL header with Magnaflow high-flow cat. I sounds a bit like a classic VW Beetle or Saab now. My stock mid pipe has a stainless straight through resonator welded inbetween, so that opens up the exhaust a bit. http://myalbum.com/photo/6AZolukwDxeZ/360.jpg But off course the factory mufflers block the flow greatly. Although, I can't say I really lost much power. Maybe 10-15% less torque. N/A cars like back-pressure, so I might even have some benefits over the 3" > 2.5" (way to big) plumbing after the ECU adjusted itself a bit.
  4. Thinking of modding your factory mufflers? They're pre-shaped. No options to put a tip on it you like. But it's quite easy. Just bolt off the factory tips and cut off the 'trumpet'. Patch mufflers up while your at it. http://myalbum.com/photo/UvJIpipjZL6o/360.jpg http://myalbum.com/photo/kz2KfZajNpSz/360.jpg http://myalbum.com/photo/NAVW7IWFD59S/360.jpg http://myalbum.com/photo/JNib2POeveSV_oFQnxv/360.jpg http://myalbum.com/photo/jET2ISfbyFvK/360.jpg http://myalbum.com/photo/1QGLbtQHRgKc/360.jpg ( ^ metric) http://myalbum.com/photo/TEXcybXxYR6M/360.jpg http://myalbum.com/photo/pJqOGV5HAE6u/360.jpg http://myalbum.com/photo/HF54jHaxYwIE/360.jpg More info? Ask!
  5. A friend of mine shot these pics of my car during the two day tour called 'Winding Road Challenge' we drove with 32 other Subaru's. Most of these pictures where taken at a abandoned factory in Germany. The last picture was taken at a quarry. I lowered the car on Prova springs since my last post. http://www.mijnalbum.nl/Grotefoto-UBGQ3PE7-G.jpghttp://www.mijnalbum.nl/Grotefoto-GL3EMJRE-G.jpg http://www.mijnalbum.nl/Grotefoto-6UUS38TI-G.jpghttp://www.mijnalbum.nl/Grotefoto-4BG7QJLU-G.jpg http://www.mijnalbum.nl/Grotefoto-D7IZ8XQP-G.jpghttp://www.mijnalbum.nl/Grotefoto-IWPNTPB8-G.jpg http://www.mijnalbum.nl/Grotefoto-7DELSTKZ-G.jpghttp://www.mijnalbum.nl/Grotefoto-MKRRAN36-G.jpg http://www.mijnalbum.nl/Grotefoto-3HJINB6N-G.jpghttp://www.mijnalbum.nl/Grotefoto-7IRC3BE3-G.jpg
  6. I've started maintaining my own cars since I got this Legacy 5 years ago. I have done and learned a lot. (As always the biggest lessons where learned from mistakes.) But there is still much more to learn than I know now. Still feeling noob-ish. It's great fun though...most of the time. This thread has been VERY helpful for me. Good luck on tracking down your mysterious issue(s).
  7. Yeah, I found out today the technique I found is totally unnecessary. The nut is high enough to simply use a pass through wrench. Excuse me for polluting this thread by posting something before actually trying it myself.
  8. Hi, I did this install I while ago, but I recently swapped the springs from Vogtland to Prova. http://www.mijnalbum.nl/Foto-CJOC3AP7-G.jpg While looking for a good way to torque the front upper strut nuts, I came across a great idea in a Saab forum. It's described in post number 7. http://www.saabcentral.com/forums/showthread.php?t=230476 Until now I just torqued it while the car is on the ground. The shaft spinned a little until there's some resistance from the shock / spring / tire, but it works. There's some flex, so that influences the torque specs. That's why I kept looking for a better solution.
  9. Shot some quick cell phone pix during sunset yesterday. These moments keep reminding me 'm still very much in love with QSM (called Urban Grey Metallic here in Europe.) http://www.mijnalbum.nl/Foto-JWWR3ERW-G.jpghttp://www.mijnalbum.nl/Foto-XBAFDN4A-G.jpg http://www.mijnalbum.nl/Foto-PPZHGC3Z-G.jpghttp://www.mijnalbum.nl/Foto-EQX7VMJU-G.jpg (Please don't mind the front wheel gap. The ground wasn't level.)
  10. Sorry for the late reply. With halogen bulbs there's no use in doing this. I did this to change the direction the 'rod' that's running alongside the HID bulb is facing. That rod casts a shadow if mounted without this mod. (A halogen bulb doesn't have this rod.) The light cutoff didn't change. I simply rotated the bulb. Nothing else was changed. Maybe the bulb is tilting a little bit out of center because by cutting the bulb base you lose one of the 3 dents in the metal. (I can't find words to describe this better in English.) But I can't imagine that causes any major problems. The light image projected on the road looks a lot better since I did this.
  11. Here in Europe this color is actually called Urban Grey, but that doesn't really matter. Some pics. Some new, some old. http://www.mijnalbum.nl/Foto-UYQ7BR37-G.jpghttp://www.mijnalbum.nl/Foto-6CBIG6YS-G.jpg http://www.mijnalbum.nl/Foto-IEYWEDWC-G.jpghttp://www.mijnalbum.nl/Foto-8H3YM8X6-G.jpg http://www.mijnalbum.nl/Foto-AD6I7NCD-G.jpghttp://www.mijnalbum.nl/Foto-ESGLTTON-G.jpg
  12. Indeed you simply rotate the bulb with the 'rod' facing downwards. (No interference with the light coming from the top and the sides of the bulb, which is projected downwards and sideways.) I used a good pair of pincers to cut the bulb base. I fits very well; it can't rotate. I did both sides.
  13. I think I can contribute to this thread! I've tried and done a lot of things. Some of them are already gone, but here goes: Wrap chrome grille 'bars'. Remove grille > remove bars by unscrewing them > spend some quality time at your kitchen table. I used black 3M di-noc, but you could use silver carbon look, aluminum, heck, even gold. http://www.mijnalbum.nl/Foto-LVXHTDXJ-G.jpg Wrap interior parts: http://www.mijnalbum.nl/Foto-RGNZOUZO-G.jpg http://www.mijnalbum.nl/Foto-LACVXKNM-G.jpg Wrap strip above licence plate: http://www.mijnalbum.nl/Foto-IYPGTIEE-G.jpg Plasti-dip weathered bumper protection plate. (Don't have better words, I'm Dutch.) http://www.mijnalbum.nl/Foto-MSHL6SNL-G.jpg http://www.mijnalbum.nl/Foto-MOFSC68G-G.jpg Cut your expensive aftermarket HID bulb for better light image on the road. Before mod: (check out dark spot on the left and overall light) http://www.mijnalbum.nl/Foto-QYZJN637-G.jpg After mod: http://www.mijnalbum.nl/Foto-SHX3PAKZ-G.jpg Mod itself: http://www.mijnalbum.nl/Foto-8QM8IGNP-G.jpg http://www.mijnalbum.nl/Foto-HSCWBAZU-G.jpg (Red dot = 'rod' that runs next to bulp, again lost in translation.) Exhaust too loud for you or you won't get wife approval? Fit silencers and 'Paint it Black'. http://www.mijnalbum.nl/Foto-DKDTM3FY-G.jpg (Invidia QS 300 with Ulter Sport NX70D tips. They fit perfectly. Silencers from eBay; 60 mm meant for motorcycles. Google 'em!) For those who are interested. Sound without silencers: http://youtu.be/iDqPMk5ueTI?list=UUXPjMPsgbYUrtsPFzOu1dkg Sound with silencers: http://youtu.be/DLHueRhOaek?list=UUXPjMPsgbYUrtsPFzOu1dkg Questions? Feel free to ask.
×
×
  • Create New...

Important Information

Terms of Use