MonopolyMan

You have to flash a manual ROM/bin to the car, or modify the hex code in the map you have to be a manual.

I'm currently in communication with him to see if he can do a UDSM ROM, waiting to hear back.

Ok will do

Wow! That's fantastic dude!! I'm assuming you're open source tuned? Would you mind sharing your ROM with me so I can reference it compared to others? This makes me very happy, I'm about to start my 5spd swap and was dreading losing cruise control! I use my car mostly for road trips so cruise is very nice to have. Thank you:)

Oh man, I didn't know you could do this! What year is your car? The passenger occupancy system is different between a few of the years. I have an 05 personally and also need a way to trick this. Keep me updated if you make any progress! Sent from my iPhone using Tapatalk

Ohhh you did? I thought about doing that but I wasn't sure which way you went and so I did it this way. If I were to do it again I would do it your way for sure. I wired the amber to each blinker but the white is wired to a rocker switch that I can turn on or off anytime. I disabled my DRL's because I have HID's inside my Morimoto Retroquik projector retrofit and the low voltage from the DRL being on would destroy the ballasts. Thanks man, I'm really digging it! I went to a car meet last night and they got tons of attention. Sent from my iPhone using Tapatalk

Yeah for sure. I made the mistake on the first one by not cutting a spot for the end of the led tube to go and had to do it after I already painted it. Make sure you cut a section out in the middle just to the right of the projector housing, but also on the top corner because the led tube is about 1-2cm to long. http://tapatalk.imageshack.com/v2/15/02/01/e4134508342a049c651624d7a8fbcfae.jpg I also went to fast and did too long of sections super gluing the tube down on the first one, my advise is to go slow and glue 2-3" sections at a time, use clamps (I used bad clips) to hold down the corners as they like to lift up. http://tapatalk.imageshack.com/v2/15/02/01/a265987583b751fac03e200bbc2c274d.jpg The last thing is I used electrical tape to cover up the bottom of the led tube as the super glue seeps out and looks crappy. I'm not sure how long this will hold up so I'll keep you guys posted. http://tapatalk.imageshack.com/v2/15/02/01/53012af55cfc754a8d18409102d8900d.jpg Sent from my iPhone using Tapatalk

Finished them tonight! http://tapatalk.imageshack.com/v2/15/01/31/a4a45c1060aa12abf9094cf4c8375cb8.jpg http://tapatalk.imageshack.com/v2/15/01/31/b81cd69d3e89401849f82e7e4bd4ad65.jpg http://tapatalk.imageshack.com/v2/15/01/31/e88a99e4aa3f4deedb5ee41aaca03d06.jpg http://tapatalk.imageshack.com/v2/15/01/31/775227792e4541c13dbeda2a0a1c36be.jpg Sent from my iPhone using Tapatalk

I'm doing my own also. Pretty happy with the results! http://tapatalk.imageshack.com/v2/15/01/30/c00358268eb006527a0266b4d7b49a33.jpg http://tapatalk.imageshack.com/v2/15/01/30/56dbfa66fdd67e78e8b944a21808e8d3.jpg http://tapatalk.imageshack.com/v2/15/01/30/ad7865a7ee68cf815799d04d4e45639c.jpg Sent from my iPhone using Tapatalk

Wow good timing! As you know I'm trying to trace my leak down right now before you can finish my tune. Thanks for the assistance! Sent from my iPhone using Tapatalk